does this mean the FT-817 is available NOW in Japan? Not yet. Just making reservations. ------------------------------------------------------------ Kohei Nishiyama / JR0BAQ / EI4VWT tara@... ------------------------------------------------------------
|
Guys,
does this mean the FT-817 is available NOW in Japan?
73's
Vic
G7PYR
|
In a message dated 9/3/00 11:25:17 PM Eastern Daylight Time, nakaji@... writes: FT-817
Japanese discounted retail pice is announced 82,000 JPY (USD=106JPY).
The first batch includes outdoor carrying special case. Hmmm... the first priced listed was about 120,000 JPY, which would've put the radio at about $1050 USD. This sounded a bit high for this radio. This new price puts it at about $775 USD. This sounds like a better price for this radio. Now lets hope that the value of the USD to the JPY goes up between now and the time they start to ship this radio to see if the price of the radio goes down even more. Mike - N1EVH n1evh@...
|
FT-817
Japanese discounted retail pice is announced 82,000 JPY (USD=106JPY).
The first batch includes outdoor carrying special case.
de JL1KRA
|
Well,
I'm sure it doesn't have a physical fan but it sure has plenty on
this group already! Ha, Ha..
Vic
G7PYR
|
"I hope the cooling fans on the FT-817 are quieter than
the
FT-100 and D. the fans on the FT-90 are some what better and you can
custom program them. Hopefully on the 817 RX there will be no fan, just
an
adequate heat sink"
I would be very surprised if the FT817 has a FAN!!!!
Paul Gerhardt
K3PG
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at .
Share information about yourself, create your own public profile at .
|
Hi Mike,
I doubt that there will be any fans on this rig..... It only runs 5
watts and is meant to be portable NOT a mobile radio, but one you would carry
so a fan would be not only a big draw of precious current from the batteries
but not required at all!
73's
Vic
G7PYR
|
I guess we know who is on the cutting edge of technology. I bet they read
our comments. I hope the cooling fans on the FT-817 are quieter than the
FT-100 and D. the fans on the FT-90 are some what better and you can
custom program them. Hopefully on the 817 RX there will be no fan, just an
adequate heat sink. nothing blows worse that having a fan come on when i'm
trying to copy some weak signal. Difficult to see but looks like a fan
shrouding on the back of the rig to me. Any body have any comments or
information?
Mike
K0YO
|
The message <000e01c0120b$792ff460$12212940@pavilion> from "Cameron C.R. Bailey" <cbailey@...> contains these words: I did hear rumor from a G-land ham that it could be modified for their
service that is similar to our CAP, which uses frequencies just outside the
ham frequencies.
kt3a Now I am intrigued! I've spent the last 10 years in disaster management and SAR with the UK equivalent of FEMA, and I've never come across this organisation! Bob, G8IYK
|
Looking at the product itself it seems to me that they are going the
FT290/609/790 road. Therefore we might expect a greatly reliable product.
Even though this time I would like to have Yaesu to listen to our
suggestions instead of costly after market mods.
73 de Patrick W3PO/VQ9PO/ex:F6DWY
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
.
|
Just get one of the mil spec ones on which its based and see what
the different links do/program differences are.
Advice came from a y-sue man BTW.
Rgds Niel
Tele. 02380 592955 Fax. 02380 593149
Views expressed are personal and not those of the
University, unless otherwise & expressly stated.
|
Hi Cameron,
that was me! although what I said was I presumed it would go
'wideband' the same as the other 'rice boxes'! Most of them do with a simple
mod or some basic key strokes.
73's
Vic
G7PYR
|
I did hear rumor from a G-land ham that it could be modified for their
service that is similar to our CAP, which uses frequencies just outside the
ham frequencies.
kt3a
toggle quoted message
Show quoted text
----- Original Message ----- From: "Paul R. Valko" <prvalko@...> To: <FT817@...> Sent: Tuesday, 29 August, 2000 08:59 Subject: [FT817] FT-817 Mods???
Does anyone have a list of mods for the FT-817 yet??? I am interested in
out-of-band TX for MARS, CAP, CB, FRS, police/fire, etc.
Thought I'd be the first to ask.
Satirically yours,
Paul W8KC
73! =paul= W8KC
Collector of Ten*Tecs and other fine plastics.
Visit the Virtual Ten*Tec Museum at:
<>
To unsubscribe from this group, send an email to:
FT817-unsubscribe@...
|
yes,
it is basically a transverter. most transverters will only handle 5 watts, but
most only a few mW.
Think
of it as a mixer you inject your base Freq. say 144 mHz and mix it and double it
and you can get just about any of the mico wave bands. SSB electronics and
several others have these types of trans verters.
toggle quoted message
Show quoted text
Another use that a friend of mine will use this new radio
for is a Microwave base reference frequency.
?
Apparently, they take a very small (in power) precise signal
and inject it into there homebrew multipliers and amplifiers and come out on
2.4 gig.
?
Not really too familiar with this application, but the small
power and stable frequency has them all very excited.
?
(Quite a few of these microwavers are using Icom 706 and
FT-100 radios, but they guys say they have way too much power for their
applications.)
?
73, ken, KM6YH
----- Original Message -----
Sent: Tuesday, August 29, 2000 7:57
AM
Subject: Re: [FT817] FT-817
Mods???
Ok guys, my tongue was firmly planted in cheek on that
last email.
However, I'm sure someone will figure out how to get 7 watts
out of it
instead of 5. Big hootie power!!!!
Also, I'm sure someone
will ask "How can I hook the ft-817 up to a
linear?" :-)
I've got
4 months to save my pennies for this rig. I can't wait!
I wonder what the
price will be? The FT-100 is running under $1000 US.
It would have to be
cheaper, right?
Regards and 72
Mike M.?
KU4QO
vtuff59795@... wrote:
>
> You Guys Crack Me
Up!
>
> A nice new QRP rig and you want to crank up the Tx
power!
>
> OK, OK I want the 'out of band Tx' for official use
and I guess it will be
> quite easy as most 'rice boxes' have this
inherent ability but, crank up the
> Tx power...... to what?
>
> 73's
>
> Vic
> G7PYR
>
>
>
To unsubscribe from this group, send an email to:
>
FT817-unsubscribe@...
To unsubscribe from this
group, send an email
to:
FT817-unsubscribe@...
To
unsubscribe from this group, send an email
to:
FT817-unsubscribe@...
|
On Tue, 29 Aug 2000 vtuff59795@... wrote: Well, I guess initially there will be a price premium because the rig will be
new but it SHOULD be cheaper than the FT-100............ let's wait and see.
Vic: Not necessarily. If they do this rig right, they're not only packing a lot into small radio, but also doing some considerable work to keep the power consumption low. After all, it doesn't make a lot of sence to have a 5W portable rig that draws 1A on receive. So far I haven't seen any preliminary specs on power consumption, but it would certainly be worth extra bucks to me if it was pretty low. What I mean by low is anything under 100ma on receive and down near 50ma would be real nice. Also, we certainly don't want a heavy TX power load either. If they do it right, it will take some work. I frankly think that this is the area where we should focus feedback to Yaesu. I mean if I need to carry a car battery around with me, I may as well have a 100w rig! Anyone hear anything on power load yet? Chuck - N8DNX
|
The message <Pine.LNX.4.04.10008291020350.15412-100000@...> from Charles Scott <cscott@...> contains these words: On Tue, 29 Aug 2000, Paul R. Valko wrote:
Does anyone have a list of mods for the FT-817 yet??? I am interested in
out-of-band TX for MARS, CAP, CB, FRS, police/fire, etc.
Thought I'd be the first to ask.
Satirically yours,
Paul W8KC
Paul:
Well, then let me be the first to indignantly rant about how doing the
mods are going to void your warrantee, destroy your radio, land you in
jail and ruin your sex life.
Modifying your FT-817 is going to void your warrantee, destroy your
radio, land you in jail and ruin your sex life.
There, now that this is in the archives we don't have to worry about it
anymore and all the new list members will see it and know that it's
unhealthy to mod your radio and I'm sure we'll never see another such
post. ;) Chuck - N8DNX I like the way this group is going. If the radio is even half as good, we'll be all right. BTW, I'd like the power upped to around 100 watts, then I could sell my FT-100 ... Talking of which, is the '817 using up all the old FT-100 case top covers (see photos) which were left over when the FT-100D was introduced? Bob, G8IYK
|
What is the best price you've found on the FT-817?
How do you access the "hidden" menu?
Does anyone know how to get the LCD to have a green background?
How can I tell if my 817 has all the latest "mods?"
What is the most recent serial number?
How does it compare to the 1000MP and IC-756PRO?
73! =paul= W8KC
Collector of Ten*Tecs and other fine plastics.
Visit the Virtual Ten*Tec Museum at:
<>
|
Hi Paul,
I think you may be jumping the gun a little here...... the rig hasn't
even been released in Japan yet!
What is the best price you've found on the FT-817? We think it should be
under $1,000
How do you access the "hidden" menu? What hidden menu?
Does anyone know how to get the LCD to have a green background? ?
How can I tell if my 817 has all the latest "mods?" Hold on, I think you may
have the FT-817 confused with some other rig!
What is the most recent serial number? There aren't any out there yet!
How does it compare to the 1000MP and IC-756PRO? It's a portable QRP rig!
Still think you have it confused with a larger relative!
73's
Vic
G7PYR
|
Hi Chuck (& the gang),
If YAESU are sensible they will make the 817 menu
driven to allow certain circuitry to be switched off i.e. display backlight,
speaker audio, syllabic squelch (that's tone or voice activated squelch on
HF)! all designed to keep current consumption low.
The most sensible thing they could do is subscribe to this reflector!
...... anyone want to suggest that to them! I guess the YAESU USA would hold
most sway with the manufacturer...... Just a thought!
73's
Vic
G7PYR
|
Another use that a friend of mine will use this new radio for
is a Microwave base reference frequency.
?
Apparently, they take a very small (in power) precise signal
and inject it into there homebrew multipliers and amplifiers and come out on 2.4
gig.
?
Not really too familiar with this application, but the small
power and stable frequency has them all very excited.
?
(Quite a few of these microwavers are using Icom 706 and
FT-100 radios, but they guys say they have way too much power for their
applications.)
?
73, ken, KM6YH
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Tuesday, August 29, 2000 7:57
AM
Subject: Re: [FT817] FT-817 Mods???
Ok guys, my tongue was firmly planted in cheek on that last
email.
However, I'm sure someone will figure out how to get 7 watts out of
it
instead of 5. Big hootie power!!!!
Also, I'm sure someone will ask
"How can I hook the ft-817 up to a
linear?" :-)
I've got 4 months to
save my pennies for this rig. I can't wait!
I wonder what the price will
be? The FT-100 is running under $1000 US.
It would have to be cheaper,
right?
Regards and 72
Mike M.? KU4QO
vtuff59795@...
wrote:
>
> You Guys Crack Me Up!
>
> A nice new QRP
rig and you want to crank up the Tx power!
>
> OK, OK I want the
'out of band Tx' for official use and I guess it will be
> quite easy as
most 'rice boxes' have this inherent ability but, crank up the
> Tx
power...... to what?
>
> 73's
>
> Vic
>
G7PYR
>
>
> To unsubscribe from this group, send an email
to:
> FT817-unsubscribe@...
To unsubscribe from
this group, send an email
to:
FT817-unsubscribe@...
|
Tom KD4WOV WQVQ879