开云体育

Hi Jerry, Sounds like you may not have turned on the NAR. It is in the Operating menu, Row 7, C Key. That should do the trick. 72 de Barry - W4WB also changed same. filtered is). only

Hello FT817 owners, I bought my FT817 at Dayton and finally got it on the air yesterday (6/2). Today I went to install the 500hz IRC CW filter which I also bought at Dayton but it doesn't seem to

Hi all,... I don't see a problem in using multi pack in parallel; The PROBLEM is trying to charge them in parallel! Tom aa2vk -- **** * Member of NORCAL, NJQRP, LIQRP, SGCI

In the files section, the schematics folder. I built the CAT/Clone cable portion of the 817cat.gif cable and it works for me. I used generic "high speed switching" NPN's from Radio Shack and picked

Thanks for the info Press. Bill W9WCR GO CUBS................

To bad John, I was hoping the supply Press was talking about was not a swithching supply. I did buy a CUP36-12-1 which is the one Universal radio sells and found there was a LOT of RF hash when using

http://www.codewarrioru.com/CodeWarriorU

Barry, That is exactly what I have now. I was thinking that by taking all of my packs and putting them in parallel I would slow the voltage drop considerably and keep my power output higher longer. I

Pres Waterman wrote: You are not willing to pay $30 for the proper cable with RS-232 to TTL level converters built into a compact plug with the proper connectors and a guarantee to not ruin your

Understand Bonnie. I think we can both agree that the guesstimates becomes more of a SWAG as the size and diversity of the corporation increases! With all this continuing success of the FT-817,

5.5x2.5 mm

Barry W4WB wrote: More power to them, Barry! That's the name of the game for business. I'm constantly amazed that the ham radio equipment niche continues to produce many new designs. I was

I'm not interested in $$$ -- just having fun w/my FT-817! (I'm still trying to put together an interface cable -- don't want to pay Yaesu the incredible $$$ for a simple cable.!) You are not

Hi everyone, I have one of these and tried it with the 817 but it does seem to generate a good amount of RF hash. Has anyone found a 2A wall wart type transformer that works with the 817 without

It's MCM part number 28-2200 Maybe viewable at: http://www.mcmelectronics.com/Search/level_5.jhtml?PRODID=14745&SKUID=13990 Pres Waterman W2PW c/o Patchogue Motors, Inc. Long Island Ford and Kia

I have no idea what the point of this discussion is; however, if Vertex is making a good profit, great for them --- they have earned it and whatever else is yet to come. A general rule of thumb is

After reading another post on this matter I did find the size of the pulg in the manual after all and it is stated at 5.5 X 2.5 mm. Julio

I just finished building the Z11 tuner kit. I checked the parts lists and the documentation and no where does it give the exact part size. I tried to measure the dimensions with a my caliper and came

"It's for balanced lines only " Not true, there is a mod, accessible from the Norcal webpage.

I'm pretty sure it came from someone on this list. If you're an earthlink subscriber, using a dialsprint POP, it could be you. The "sdn" may indicate San Diego (but then again, it may not). 73,