After reading another post on this matter I did find the size of the pulg in the manual after all and it is stated at 5.5 X 2.5 mm.
Julio
toggle quoted message
Show quoted text
----- Original Message -----
From: Julio
To: FT817@...
Sent: Sunday, June 03, 2001 6:21 PM
Subject: Re: [FT817] Power connector for Z11?
I just finished building the Z11 tuner kit. I checked the parts lists and the documentation and no where does it give the exact part size. I tried to measure the dimensions with a my caliper and came up with 5mm X 2.5mm which seems to be the same as one of the plugs listed in the Radio Shack catalog. I hope this helps.
73's Julio
----- Original Message -----
From: n6tqs@...
To: FT817@...
Sent: Sunday, June 03, 2001 4:24 PM
Subject: [FT817] Power connector for Z11?
Can someone tell me easily what power connector the Z11 uses?
I'm building cables for my power supply system, and figured I'd to get
a jump on it.
73, doug
Yahoo! Groups Sponsor
To unsubscribe from this group, send an email to:
FT817-unsubscribe@... and for a great FAQ ( Frequently Asked Questions ) see
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Yahoo! Groups Sponsor
To unsubscribe from this group, send an email to:
FT817-unsubscribe@... and for a great FAQ ( Frequently Asked Questions ) see
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
