开云体育

Dave Davies - I’m still waiting for that photo you promised of the Thickness Stop with “analog measurement unit”. Did you forsake me? David Best

This is indeed confusing and news to me if they’ve changed the digital stop configuration when applied to the 700-series machines. Felder is always changing things without telling anyone outside the

Mark, I am following your venture here. I am where your at.. make choices. I can tell you without the people here I would have made some bad decisions. I have learned more from this forum than

Liz Rogers directed my attention to the digital stops and cross cut fence option for the Felder 700 series machines today. She noted that the setup that is paired with the Kappa series is different

It is a done deal. I am not to worried about it being I have no shaper tooling of any kind I will just standardize on that size. Forever walking the wrong side of the tracks.

This is a good idea. Have them swap out the spindle if you can. David Best

That video illustrates the use of the precision miter guide well, but keep in mind, the crosscut fence being used on this K700 saw is the non-digital (i.e. Analog) fence, and it’s easier to position

David's explanation is the best I have ever seen. I think what you really have to ask your self is what type of work are you going to do with it and will it help that process? Projects in my shop seem

https://youtu.be/LVYUss6pJqQ This is a very good Felder video demonstrating the technique using the slider, you can find the use of miter index at around 7 minute. I have the miter index with length

Anyone knows of a video(s) where one can observe/watch the "Precision mitre guide with length compensation - Option 173" at work? I can picture the procedure after reading David's description, but a

My guess is that the pictures are treated as attachments and as such, they are not permitted according to the statement on the group's homepage. "Attachments are not permitted." Consequently, they are

Hey Mac I have a Milwaukee 1/2” drill driver for about two years good wrist snapping torque ! It has served me well I’ve got the extension on the slider mounted I will have to send you pictures

It is not just you. I cannot see the pictures either. I can see the pictures Joe and Mac sent in their email. I believe they send email with picture using iPhone. James

i can never see pictures for some reason all i see is jpeg 1 etc.

Greetings I did pick up the Milwaukee fuel surge a few weeks ago and it is rad ,,,lots of snuff if needed it has four settings three for different torque settings and one for drilling. I have used on

Thanks David for the explanation. I opted for Option 81, the over head saw guard, which makes Option 91 incompatible/not applicable. :)

30mm spindle is one of Felder best bargains for the 700 series. When I ordered my F700Z in 2011 I ordered with a 1 1/4" mainly because of it being the NA standard and it was the more costly of the 2

When you order the machine, you need to specify a spindle. But they should be able to take the spindle in the machine and swap it for a 30mm if that is what you really want. They have extra spindles

Hi Joe I do not feel 30 years old is very old for woodwork. Much of the modern standard is a 50 life span at best. It's sad because trees will often take 100 or more years to grow to where they will

Getting 1 1/4" shaper cutters isn't difficult. I order from Greg at Rangate and the quality of their cutters is excellent. Dave [felder-woodworking] <felder-woodworking@...> wrote: