开云体育

Bill, Yes it is 24VAC that is present on terminal 7 when in auto position. Closing external (user supplied) relay provides 24VAC to terminal 8, which should start the machine. Imran

Hahahaha! Lucky

I saw a Quincy unit in a shop with two small boxes next to the pressure relief valve. Onebox had a red LED light and was labeled “Check Valve Is Defective”. The box next to it had a red LED

By the way, someone can confirm, but the diagram says something about 24 VAC, so I guess 24V AC. Bill

Here is the RL 140 electrical diagram page for the auto start solution. Automatisk is the german version of automatic or automated, this what I was told :).

Thanks Bill. From your write up it appears that the machine starts when contacts 7 & 8 are shorted together. Anyone, with this setup should be able to see an AC or DC voltage on one of the contacts,

Hi David: “Plenty of power in Australia” is 200A at 400V of 3 phase power. I have 63A at 400V and it takes all of that to start my WB (15kW single motor plus various small motors for feed, rise

This was the relief valve that takes the pressure off the compressor itself, not the tank relief valve. Thank goodness the circuit breaker tripped before I had a full fire. Brian Lamb blamb11@...

You are absolutely right, I reread the manual and it is for the Felder automated start solution. I do not know how this OEM Felder solution works, but at some point it opens and closes this circuit

Mine too Sent: Tuesday, January 26, 2021 1:16 PM To: [email protected] Subject: Re: [FOG] Air Compressor Big and Small- David Kumm Style My Quincy compressor has 2 relief valves in case one

My Quincy compressor has 2 relief valves in case one fails. -- Jerry P *Life is what happens to you when you're making other plans.* "You can observe a lot by watching."? Yogi Berra

Thanks for the reminder on the cal air, I think I left mine on overnight- hope the shop didn’t go up in ?while I am at work... Regards, Mark https://www.instagram.com/kessler_woodworks/

I would like to get the 3d file as well please. My email is elwinkershaw@.... Much Thanks! Elwin Kershaw

I started with a California Air Tools compressor, but I tended to leave it on and the valve that releases the head pressure stuck one day and I came into the shop and the unit had almost caught fire,

Brian, I couldn’t agree more. When my dads' 40 gallon kicks on it seems like I have never heard the noise before. It startles me every time!

If that’s all the sand blasting you intend to do, then definitely look at no more than a 5hp unit. As for the smaller unit, look for quiet…. period. The most irritating noise in the shop is the

Joe, Fantastic info. This is a very understandable explanation of CFM. Thank you for taking the time to explain! Anthony

Seems that way, I run the small compressor at a slightly higher pressure than the “regulated” line pressure coming out of the big compressor. This way it seems the large compressor only feeds air

Anthony, there are compressor brands and even levels within the brands. As an engineer I have a problem in that I always need to learn a ton about a topic before I make the plunge. On air compressors;

Bill, I did not know auto position had something to do with auto clean as well. Do I understand correctly that in this position you can autostart/stop with a relay? Imran