开云体育

Try the Square opening with a small flathead, you just push it in and opens up the spring. I don’t have the exact connector at hand but here is the concept Regards, Mark

Hi Mark, I have tried pushing in the small round and pushing the little sliver of the spring loaded part back and down with no luck. One would think that the green tabs would do something but I do not

Imran, looks like a small flat head above the round where the connector goes Regards, Mark https://www.instagram.com/kessler_woodworks/

I do not want to force anything but gentle poking has not given me a clue about how to get wires out of this connector. This is the new board: Appreciate any help. Imran

Thanks Joe, I was told that Chinese made knock-offs are prevalent and that drawings with dimensions are no longer shared with customers.? Ive been calling and asking for information if the sizes and

Sorry I don’t have one. Can the Felder rep ask if the factory has the design dimensions for the part? I visited the factory in 2010 and the utilization of CNC for cutting and folding metal was

Hello all, recently picked up an RL160 from someone who purchased it at an auction with missing parts.? Its from 2007 - It is missing filters and the tray assembly that holds the brushes and

I don't know if that will work or not. I don't believe it will. Explained below. I wired this back in 2014, so finding some details is harder than it should be. However, this is the relay I bought:

Hi, I am interested does this fit k700 current model year? Can you share the part numbers?

Looking in Thingiverse I found this variation on David's version https://www.thingiverse.com/thing:4185589 [image: image.png] Dave Davies -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

Like others, I also recently got a 3D printer.? I've mostly used it to print custom hose adapters.? I've posted the STL and open cad files for a 120mm to 4 inch quick connect adapter that I use on

We have a 2003 CF741 in our small (15' x 30') shop. ?Use it for remodeling projects (custom fab) that our customers need. ?Has the 7' slider since we don't cut much plywood. ?Just takes planning to

Joe: That was my experience using my router spindle on my KF 700; never had an issue with router bits running at 15000 rpm. Terry

I also ordered an HS950 Dec 31st and was told they had sold so many of these sanders during the promotion my order was securing a spot in the production line and I have not been provided a delivery

I posted a few weeks ago that I believed that routers slowed a lot under load. I decide how hard to push my routers based on the pitch the motor makes.? No load and the pitch is high, as the load

Hi Lucky, Delay is my middle name, you helped me with getting the air pressure set up correct for the pulse cleaning on my RL 300 Its working great but it is new. I have never got the water set up

Apologies for being a rookie - I should not have tried adding a hashtag to an existing message, it broke the thread so adding again here for continuity. Agree we could add a magnet if needed. For now

The dial regulator is sweet. Each dial I have is showing the output pressure that particular regulator is making. The tank has one from the factory, the main output regulator has one, and each

Agree we could add a magnet if needed. For now they remain 100% printed. 1. The existing version was made to fit my clamps and are friction fit....just right to separate when desired but do not fall

Taking stock in the shop, these items are available. PM if interested and we can discuss off this forum. I won't answer any questions back to the group out of respect to the other FOG members who