开云体育

It seems that CopeCrafter may be out of business. ?They were made by Reliable Cutting Tools in Texas, and I can't reach them by phone or email and I can't find one new or used from any other source.

Does brand matter? I’d like to find one locally or from Grainger Sent: Friday, May 21, 2021 8:24 AM To: [email protected] Subject: Re: [FOG] Belt size request for 2017 F700Z I believe

Thank you for the link. Have been previously told that it’s worth more than I paid for it. Still haven’t heard back from Jesse, maybe he’s not with them anymore...

I believe metric belt pj559 cross references to us 220j6.

-- Tom Gensmer Heritage Home Renewals, LLC Minneapolis, MN

Good morning Joe! I just checked the shaper unit on my 2020 KF700S, and found the following: -- Motor package is 7.5hp 3P 60Hz -- 1-1/4" spindle -- belt drive is marked as "Rippenband 9 PJ 559" --

I've needed a few parts for the Tannewitz PH bandsaw I'm restoring.? The good news is Tannewitz still has all parts.? The bad news are the prices.? Here are the parts and prices.? Tannewitz

The used 2017 F700Z I bought at auction did not ship with a belt for the 1 1/4" spindle.? The belt for my 2010 Variable speed KF700SP does not fit.? Does anyone know the belt size so I can get one

You will sell the A3-31 in a heartbeat. I sold mine to a FOGger . /g/felderownersgroup/message/103077 But you can also list in Craigslist. You will get a LOT of serious inquiries.

Hi all, I have a call into my rep at Felder, but wanted to ask here as well. I have a 12” A3-31 Hammer Jointer/Planer and a Hammer N4400 17” amongst my woodworking tools that I’m planning to

This guy spent $150 to build the jig like CopeCrafter. https://www.youtube.com/watch?v=WKvfhQYIcq4&ab_channel=BrianCNC James [email protected]> wrote:

When My planer is having feed issues? It is the Table. I have to clean the pitch and resin off it using any cleaner Mineral Spirits works.? You could use 409? or anything really Then I apply a

Hi Joel: Thanks for your reply. I would personally much rather use aluminium extrusion rather than the timber that David Z. has used. This is certainly what I’ve done, following many others. But

Thanks. ?I will be emailing David Best, and hope he will sell me a swing down mount for the pressure jaws along with a micro adjust for the thickness stop. ?Great videos! enclosed a picture of my

Hi Mike , not tape to lift it , to deaden the squeal some. This is where i put the tape… Regards, Mark https://www.instagram.com/kessler_woodworks/

OK The search for a Capable Process has been pursued, using comments from the FOG Success and repeatability has been achieved The template was modified with a 30 mm overlap from the edge to allow a

Hi Joel: For endgrain work, I use the Aigner Contermax for very small furniture parts only. Larger cuts call for the tenon plate, short crosscut fence, and Mac’s clamps, as per David B’s style.

Thanks Mark. Thought it was for pressure after the infeed roller. I like the idea of tape to lift it ever so slightly. Too many folds to bend it evenly (and that doesn’t seem right anyway).

I use the Aigner CounterMax (coping sled) if I’m making a single door. I have experienced some inconsistent registration using the Aigner CounterMax at times, but it’s pretty rare. It helps if the

It is not a pressure plate, it is a chip deflector and that is it’s only purpose. Do NOT push it down , obviously you wouldn’t do that if you wanted it up but if you find that you bent it up too