开云体育

So...... I wanted to have a mobile base for my drill press to be able to move it around. Nova explicitly recommends against this in their manuals—understandably, due to center of gravity,

Can you share a pic of what you snapped? Just be good for other owners to watch out. BTW, I was able just pull the column down and rest it on the edge of the foam and add the base. I am a slight guy

Sorry Wade for the name spelling, I hate this autocorrect Mike no problem.

Solberga is an excellent drill press! The geared head will last forever but probably overkill for woodworking. However if anyone wanted one, let me know and I can sell you one at a discount off list

Stan, sorry to hear that. I had the exact same experience two years ago. They used long screws for thin material so I had a ton of scratches all down the main surface of the slider. After much back

Hi Natanel. I’m going to withdraw my request for two improved T-nuts. Looks like a great deal, but I’ve since made the F& F jig and that works well enough for my uses. Best, Mike Ward . T. Michael

Stan, don't accept this and they should replace the table and don't let them tell you to pursue damages through the shipping company.? Out of the 5 machines I ordered all arrived in perfect condition

I have a K500 I bought secondhand from a guy who couldn't wait to get a Sawstop. It's a short stroke.? I can't crosscut 4x8 panels on it but I do find it useful.? The 50" fence is mostly a hassle

Jim, as an alternative do you have a narrow palette jack as that is the best way to get that machine off a pallet with a plywood ramp. KRP

I agree with David. It's a hard lesson, but the only way Felder will get the message is if the customer refuses to accept poor service. If the show room piece was all scratched up, none of us would be

Netanel, Quick name correction, it’s spelled Wade. ?? Did you see the pictures I posted to you a while back from David’s Flickr account regarding the flip lever. It’s far superior to the

I sure hope they take better care of the product in Sacramento than in Dallas. Good luck Rohit. Sent from Proton Mail for iOS On Fri, May 16, 2025 at 18:14, Rohit Kulshreshtha via groups.io

I managed to snap off the speed control knob at the rotary encoder stem while mounting the drill press head to the column. I reached out teknatool earlier this week and they’re shipping me a

Sorry to hear that Stan. It’s kind silly that packaging is an afterthought on such expensive machine. ?I hope Felder does the right thing soon and you’re back to enjoying your new toy. Keep us

Hi Wedge, sorry, I missed your question. currently it looks like we have only 2 people who are interested in the two machines configuration (that has upgraded flip lever). I would need to ask the

Oh I am definitely not going to let that.... slide. Upon opening the main pallet I discovered that the xcut fence was not secured to the chassis so I now have a scratched chassis (whatever) and

I never received any confirmation or solid answers to my questions from Netanel. I’m assuming you must have had enough people opting in on this endeavor. But, I was still waiting on my questions

That's exciting, thanks so much for doing this Netanel!

I give people some time to find this post. I’ll start with the process in the first week of June.

Thank you all for the advice and pointers and saving me from more frustration! Managed to eliminate the snipe by pulling the outfeed fence forward by around 1/16" (had to play around with this) and