开云体育

Imran, I understand your concern. Hopefully the shipping fees from Whitehill are not as outrageous as Felder's. I was told by Felder that the shipping fee is C$75 for the capacitor for my bandsaw from

Thanks Brent. Looks like I will be ordering from UK, if I use this link. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

Yes, now I understand why 40mm euro knives do not work on whitehill's 125 x 55 cutter heads. James [email protected]> wrote:

Thanks for the confirmation. This could be a good selling point for whitehill's 55 mm knives. Whitehill never mentioned that on their website James [email protected]> wrote:

The pin spacing and diameter are the same, and the knife will technically fit in the heads, but too much is buried inside the head.? Those 40mm "three holers" are designed for the smaller

That's correct, the 55mm knives will work in the Euroblocks (that term is technically reserved for the 40mm limiter blocks) as well as other blocks including the 125x55 limiter/combi heads but the

Brent, Are you saying whitehill's 55mm knives can be used on the cutter head for the standard 40mm Euro knives? Like this one

In this video the user demonstrates many aspects of this unit. Including square (rectangular) mortises. https://youtu.be/lZUrKZeOU0U?si=vTx3L2jBF5OBsaHk [email protected]> wrote:

Thanks for that feedback, Patrick. I used my PM for my shop doors, and for workbench legs. It is hard to handle large pieces on the vertical machine, and hard to get the mortices square and located

Hey John, I have the domino 700, which is a great tool, but the 14mm tenon is still a little dainty for larger projects. For example, I just did an exterior door for my parents house, and I used the

I have watched video of the Felder 250, and it seems like quite a useful mortiser. I have a Powermatic vertical mortiser, and it is quite limited. Not well built, either. I’ve tried a Domino, and

Hijacking this thread slightly, but I’m also curious in the horizontal mortiser discussion. I picked up a larger automatic hollow chisel mortiser a couple weeks ago, and haven’t used it yet, but

Yes, that's correct.? You can order through here, this is the tongue and groove section of their web site: https://www.whitehill-tools.com/profile-cutters/tongue-and-groove-profiles/ You will have to

Brent, Please share a link of where you order from. I only see whitehill site from Luton, UK. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

No, directly from Whitehill.? I got a set of knives from them in 29 hours after notification of shipping!? That's not normal, it's more like 2-3 days as normal for me.? I'm 75mins away from

Hi Brent, Is this by ordering from Scott & Sargent? Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

You can run whitehill's 55mm knives in those heads too.? Hundreds of profile options in M2 steel and somehow delivered to my place in southern Ontatio in 2-3 days fairly often if in stock.

James, I stand corrected. Joe

Hi John, is there a rivet there blocking the way? ?My RL125 has two that I would need to file down in order to fit a machine adapter. ?I opted for a 1ft flex hose straight to the inlet anyways for

Hi all, I’m in the process of installing some new Nordfab ducting. I hit a minor roadblock right out of the gate: the 8” QF machine adapter doesn’t quite fit on the inlet of my RL200. It’s