开云体育

So sorry Ed, already spoken for... Bill Bélanger eduard.nemirovsky@...> wrote:

Bill I will pay shipping for your ripping shoe. How much to zip 24445 Thank you, Ed wrote:

Thanks, guys! As an ultimate newbie I appreciate the help! Maybe my saw has a ripping shoe included. It is somewhere in PA right now, according to the trucking company, so I don’t actually know what

I agree with Brian. You can use UHMW polyethylene and insert a flanged nut into it (won't cut into or deform your aluminum), or in a pinch you can just use a bit of plywood and a T nut to match your

Keep the t-nut Dave Davies wrote:

I'd give the ripping shoe to anyone who will pay for the shipping. Bill Bélanger <david@...> wrote:

I use 1/2” x 1 1/4” flat bar stock and then drill and tap whatever thread you want in the middle. Brian Lamb blamb11@... www.lambtoolworks.com

Clamps are extra cost accessories. Buy the pneumatic clamps from Mac Campshure. https://mac-campshure.squarespace.com/ <https://mac-campshure.squarespace.com/> The ripping shoe should come with your

The price on the Felder store is for one nut. I've spent a good amount of time trying to find and off-the-shelf nut from McMaster and Grainger, and ordered a couple I thought might work. I've been

This issue about the overhead support arm bracket has come up several times here. I’ve pulled a tread from back in 2019 where a few of us noodled over the issue, and James Zhu posted photos of his

I wonder if I missed getting necessary accessories, like clamps and a ripping shoe, when I ordered my saw. I’ll chalk that up to not knowing much about the saw when I bought it. I see that the

Jbowen, Thank you for posting this. My takeaway from all that you mentioned, was the Felder guys left your table tweaked?! As much money as they charge for these things, that’s not a good sign at

Steve and Jay, I am just curious about overhead saw assembly affecting the table leveling. One on K975 is much more substantial (and fixed ?) than the new ones I see that can be swung out of the

jbowen, I had the same issue with that bracket on the overarm dust collection. Somewhere I had seen a video of someone installing the unit and his bracket did not line up either so he drilled new

Thank you, JBowen! -- John Hinman Boise ID Not a Felder Owner yet - expecting K700S in February and A941 in April 2022

Mark, I get the VSM from a small local outfit here in Minnesota. Dan is a good guy to work with. https://topindustrial.biz/ Jason Holtz J. Holtz Furniture www.jholtz.com 3307 Snelling Ave. South

Hi John, I am a new K700S owner myself and understand where you are. How to get from truck to house, slider onto machine, what blades to use all the Felder 101 stuff.? A lift cart is your best bet or

Hi Ariel, Sound like a good idea. Never liked washer there grinding on the AL housing. Thanks for sharing that. Imran

If you are like me and have your Big Squeeze Clamps for 15+ years and don't have the heart or the pocket or the need to buy Mac's very nice (and expensive) clamps, you can improve yours... For less

Thanks Mac and Steve. My shop is pretty open, and I will be ready for the fellow. I want to avoid mid-understandings so am asking the dumb questions now instead of later. -- John Hinman Boise ID Not a