开云体育

Hi Marcus, Besides popping the Estop (You may try engaging it and popping it out to be sure) as Brian mentioned, there are 2 other micro switches on my K975. Your saw is different but ensure that the

I have had it for over a year now. Does everything I ask of it including the tilt function. I used bora 4wheeled base but the base was extended to its max and consequently the long axis bars bent at

You sure you twisted the e-stop and it popped back out? Brian Lamb blamb11@... www.lambtoolworks.com

Hi guys! I’ve got a new brand new saw and I can’t get the machine running. it’s a felder k740 5.5kw 230v 3phase the motor won’t start… the emergency button is off, main power switch is on

Lee, I built one, but I am not quite finished.? I built a base for the casters and rotated the metal base cabinet 180 degrees so that the opening for the back is now in the front.? I bolted

I am curious if anyone has or is going to have a mobile base cabinet created for the HS950?

The three shims shown below on the left go between the dado cutter and the arbor locking cap on the right. They pad out the distance between the cap and the cutter so that the cutter is kept in

Wade and Michael, Thanks for adding the details. Wade, as for the shim set, just confirm with Felder which one will work with the dado set. I have two Felder shim sets, 30mm & 1.25” bore, to use

If only they would have rounded the sharp edges on the fence.? Brutal when you run into it... PK

I had dado capability added to my K700S build and they sent, what I believe must be shims for it. First picture below, from left to right, is a 2.0mm, 3.0mm, 4.0mm thick shims and then an arbor nut.

PK, thanks for the instructions. That missing page would’ve been helpful. And Tom, thanks for your photo as well. I’m a little chagrined to admit that I was thinking the miter gauge should

I have a miter gauge for my HS950, and it matches the image that PK uploaded, does not match what Victor uploaded. The set screws (part #13) are used to secure the bottom piece in the t-track,

My instructions look different than what you have. I scanned the 4 pages.? It calls out the modification for an HS950.? The miter gauge is made for a few machines. PK

I had the dado package added to mine and got both sets of felder dado blades. As you say Irman – one set come with the prep that includes shims to position the dado blade “set” and the other

PK, thanks for the info. I've attached the three pages that came with the miter gauge. Wasn't clear to me that wider (bottom) part of the miter bar needed to come off. And it seems odd that the miter

For the miter gauge, there are some headless hex screws you put into the bottom piece and they go through the screw holes in the miter on top. Kinda hokey. The shipping label on mine says: Made for

Are there two types of shims used with Felder dado tooling? For example for K975, Felder provides 3mm, 6mm & 9mm shims to make-up the space on the arbor. My dado set (not Felder) has the finer shims

?? Will do. Their site needs help!

As I recall from other recent posts here, you need to order a separate set of shims for the Felder dado cutters. I looked at the Felder web site to find the part number for the set, but the site is so

Thank you David, Great info. I was wondering about dado blades for my new slider. These are nothing like the American cabinet saw dado blade sets, that’s for sure. They are pricy! But hey cry just