开云体育

Someone actually accepted this delivery? Imran

Oh sorry for the confusion Mark, I was meaning the zero clearance insert at the end of the cross cut fence. ?As you pass over the scoring blade. ?It would just create a very tiny rabbit cut into the

This popped up on FB today from a guy who just took delivery of a knee mill shipped LTL. Clearly it was not packaged correctly, but the local freight terminal did manage to stick another pallet under

Yes, I use scoring, it works with the ZCI you just raise it up while its on at 90deg to cut through. If you change the angle of the blade you will want to lower it first tilt to angle then bring up. I

Mark, Do you use a scoring blade? ?Was wondering how this might affect a zero clearance insert on my slider. ?I guess it would just have a very small rabbit cut on the underside once I’ve made a

Mike, John Renzetti makes ZCI throat plate systems for the K/KF700. You can email John here: jrenzetti1@... <mailto:jrenzetti1@...> I refer you to this previous posting:

Thanks for the suggestions Mike. Here's a pic of the 80mm to 4" adapter on my F700Z. Not sure why I'd need an elbow. I don't see the need for a zero clearance insert on my saw because I always use the

Mike, The rectangular shape of mine is not perfect either but is very close. For example, there was daylight in a corner. I cut a strip of thin packaging fabric. Made a loop, with painters tape

Bill, Your parts on the Etsy page look good, so I wonder if you're interested in making other parts I'd be interested in seeing for my KF700S. 1) Zero-clearance insert for the saw blade. 2) 4" adapter

The following files have been updated in the Files area of the [email protected] group. * /How tos, modifications, and other notes/Felder 2002 Router Spindle Rebuild.pdf (

This is in fact an issue I seem to have as well, but only more recently. I had to do some minor adjustments about a year after I got the machine, but recently the intervals become shorter and the

? ? ?Hi Wade, See if the link below works it should even if you are not on Instagram, It is a post on the making of it. Yes, glued up multiple layers of BB. The larger fence has set screws on

Hi Bill, Thank you for getting back to me on the zero clearance insert. ?I have the Format cross cut fence with DRO’s. I’m interested in getting one of these from you, but do I need additional

Thanks Mark, That zero clearance insert looks really nice and clean, no fasteners showing! ?How did you go about connecting this to the end of the fence? ?Is there a block of wood connected to the

This is the situation I have with my hammer a3-31, and why I am upgrading to a minimax fs52es. However, a much bigger issue is that my tables don’t hold settings for more than a few weeks. That was

Hi Bill, I just ordered one for my saw, along with the overhead 4” port adapter. I noticed that you have the 120mm to 4” adapter. Do you notice any decrease in collection using the 4” hose on

The following files have been uploaded to the Files area of the [email protected] group. * /How tos, modifications, and other notes/Felder Router Spindle Rebuild.pdf (

Had a chance this weekend to start adjusting tables, slow going. Will be nice when adjusted, tables are big and dead flat,,,planed! All other systems ? martin/campshure/co/llc mac campshure 7412

Hi Wade, If you're interested in purchasing a 3D printed one rather than making one of your own, I have them available on my Etsy site. Thanks to Brain Lamb for the designs. I also have dust hose

Mac, how does the Bauerle JP work now? Dave ________________________________ Sent: Monday, January 24, 2022 4:48 PM To: [email protected] <[email protected]> Subject: Re: [FOG]