¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Cross cut fence zero clearance insert #k700s


 

¿ªÔÆÌåÓý

Mike,

John Renzetti makes ZCI throat plate systems for the K/KF700. ?You can email John here: ?jrenzetti1@...? I refer you to this previous posting: ?/g/felderownersgroup/message/114943

I make Zero-Clearance throat plate kits that fit the K940, Kappa 40, and Kappa 400. ? Email me if interested (david @ bestservices . biz). ? Details are here including a dimensioned drawing if you want to attempt making your own - it isn¡¯t simple: ??

David Best

https://www.instagram.com/davidpbest/



On Jan 25, 2022, at 8:04 AM, Mike <mike@...> wrote:

Bill,

Your parts on the Etsy page look good, so I wonder if you're interested in making other parts I'd be interested in seeing for my KF700S.
1) Zero-clearance insert for the saw blade.?
2) 4" adapter with 90 degree angle to the right for the overhead guard.
3) Insert for sliding table to hold jigs using 1/4", 5/16", and 3/8" bolts?
4) Elbow from 80mm to 4" for the shaper output (not enough room for an adapter plus a 4" elbow)

The blade insert isn't as easy as making them for Delta table saws and I spent an hour making an overhead adapter, similar to what Imran did, but it leaks. If the sliding table insert is more accurate and durable than a piece of oak with a threaded insert, it could be interesting.

Kind regards, Mike

Join [email protected] to automatically receive all group messages.