开云体育

Update:? Felder support believes one of the capacitors is the cause.? I have two new ones ordered ($55).? Here are a couple pics.? I will provide an update if this does not fix the

*Originally created by George Sutherland, a former FOG member (now deceased) and a connoisseur of truly exceptional eggnog* " Here it is. I've used this recipe for over 20 years by now, I think. It

FWIW, I would have also rated based on 'how fast stock is removed' rather than 'how much stock is removed per $ of paper'. ? 3M still would have won but others like Festool Granat would have rated

My local distributor just got this new 3M Xtract in stock. I ordered 3 boxes this morning and will get to try it out tomorrow. It was $58.50 for these boxes or $0.39 each disc I believe. That is

The video's Patrick Sullivan did on glue joints were great!

Thanks for posting this Marty Jonathan Katz-Moses (JKM) has a decent following on YouTube and he seems to have cracked one of the nuts on how to make money from YouTube (>400K followers) He's located

I agree Mark. I'm a retired physician. Did you know that 10% of "controlled studies" are reproducible in follow-up studies? At least this sandpaper study represents an attempt to sort the

I think you are overthinking it. You are listing a bunch of variables without knowing if they actually have an impact or not on the end result. For example, you cite using variable pressure. Unless

This sandpaper study is emblematic of a real scientific attempt to answer a question. The criticism of the study is typical and important to the scientific method. Studies are never “perfect” to

Having spent some of my career designing and running experiments I can see flaws in his experimental process. I thought about running my own test.? I'd like to see additional factors like: Grain

I had an intermittent no start on my CF741.? It turned out to be wires were loose on the back of the mushroom e-stop to the left of the saw height adjustment.? ?The electrician at the factory was

Thanks very much for that information. I had an email response from another owner who suggested the primary on off switch as well as the mushrooms may be problematic. When I first got my machine I

I’m going to try it based on material removed. The pricing he listed seems way off. I’m guessing he bought low quantities or does not know where to shop? Specifically the festool price he listed

I'm calling bluff here before I spend all the time on the video I found some major flaws: 1. RETAIL PRICING USED - ugh. Commercial/industrial customers don't buy retail pricing, not a fair comparison

This is the 2nd test he's done. My only issue with his conclusion is that out in the real world, 3M isn't widely available. AND when the real world price of of 40 cents a disc is factored in? -

Well done test…. and now I have a new brand to buy… :-) Brian Lamb blamb11@... www.lambtoolworks.com

I found a well done test ( https://www.youtube.com/watch?v=NZDCRFi8dKY&ab_channel=JonathanKatz-Moses ) on hook an loop sandpaper.? I found the results compelling and wanted to share them with the

The problem isn’t the delays. Those are obviously out of Felder’s control, and they are impacting all global shipping and supply chain. The problem is the poor communication, and in many cases,

I just drop a female cord down from ceiling backed by a breaker. Not being able to run a test piece makes no sense to me. Sure if something goes cafluee than you have to turn the feeder off by

If I remember correctly I just made the block to whatever dimension then made several test cuts with the fence in the high and then low (or vice versa) measured the cut pieces with calipers and