开云体育

I chatted with a couple guys from Kundig at the show in vegas. They are going to email me the instructions. Said it’s like an hour or so to remove. Sent: Friday, July 23, 2021 4:46 AM To:

Thanks Brett, one other data point, my single phase loads, (lights, pool pump part of the day, and 5 Ton heat pump are maybe 30A and I have a 600A service. There is maybe 0.1V drop when those are

I have a Fluke clamp on true RMS meter and I am measuring each leg out of the breaker individually. Sent: Monday, July 26, 2021 2:25 PM To: [email protected] Subject: Re: [FOG] Any experts

Joe, Okay, between your reply and Mark Thomas's earlier reply, my next thoughts are that the voltage differential is likely the transformer impedance correction lugs. Chances are they made some

How are you measuring current?? ?You're running a single motor (eg, 3P saw) with no load, and you have a clamp meter that you sequentially place on the three lines coming out of the breaker?

Brett, 1. No question, I have open delta. Two new transformers 2. The utility measures Leg “A” to neutral and Leg “B to neutral at the transformer and at the service entrance to so if there is

Thanks to everyone that reached out with interest in these items. All pieces sold within 3 days of posting and our family wanted to say thanks to the FOG community for all the insights, feedback and

Brett, thanks for the reply and sorry for the late response. 1. I have two transformers, Utility supplied Open Delta 230V. 2. The utility has true 3 phase Legs A, B, and C, running overhead behind my

Well, simplest is a single phase motor on a switch, won’t have a brake, but plenty of bandsaws haven’t ever had brakes. Next simplest is to use a VFD to run a three phase motor, you might need a

Brian, Mostly because I am not really up to date on machine electrics and I tend to keep electronics to a minimum in the workshop. Thanks for the pointer I will investigate more tomorrow.

My question is why? A VFD will get you three phase and braking and eliminate any existing wiring on the machine. I just don’t understand what you are trying to do... Brian Lamb blamb11@...

Hi Ameer, My machine displays following upon power up, prior to displaying the table position. This happens irrespective of reset button status. I recommend contacting Felder to find out what your

Dave, It is an FB450 I believe it is DC injection Braking; the machine is in storage and i will have to dig it out to check. I've converted machines before but never one with braking, ordinarily I

Imran, Sometimes I turn the AD741 power switch to OFF before shutting down the RPC, and sometimes I forget and the power switch is in the ON position when i power down the RPC. When I power the AD741

I have a 2001 machine… is your slider 8 foot or 9 foot? You can’t really cut 8’ sheets on an 8’ machine without having the blade at full height and a 12” blade. I have some troubles with the

looking into purchasing a ?KF 700 pro, 2002 model from the friend and trying to determine value of it. It has the 8 foot sliding table and numerous attachments. It is in excellent shape and has been

??????If it mounts to a 30mm OD bar (I guess I can re-bore to 30mm if it is less than that) I will be happy to pay for shipping. I can use it on my FD250 for light work. I got rid of

I'm gonna *cough* here and ask at what point leaving the braking non-functional for your own personal use is an acceptable option. I've never had a bandsaw with a modern auto-brake, and I actually

Hi, I assume it mounts on a vertical bar. If so, what OD bar is required? Thanks, Imran

Randy is a cheapskate.? I will DOUBLE his offer if shipping is included