Re: planer power drive height adjustment?
|
Hi Ameer,
?
My machine displays following upon power up, prior to displaying the table position. This happens irrespective of reset button status.
?
?
I recommend contacting Felder to find out what your model is suppose to do when it is powered up with reset held. If it is suppose to display 20mm or .785¡± your issue could be as simple as that the reset button is stuck or that the reset input (where ever it is being read) is stuck. It is already switching between ¡°in¡± an ¡°mm¡±, which is a good indicator.
?
If this turns out to be true, Felder should be able to offer a solution. If not there certainly are options you can explore.
?
Imran
On Jul 26, 2021, at 1:13 PM, Ameer N. <highentropy@...> wrote:
Imran,
Sometimes I turn the AD741 power switch to OFF before shutting down the RPC, and sometimes I forget and the power switch is in the ON position when i power down the RPC. When I power the AD741 back up the DRO number is either at 20.0 or 0.785 regardless of where the bed is at. So it also switches between inches and mm between shutoffs. I'm not sure what the fix is, or if there is one? My unit is from 2004. -Ameer |
imran