开云体育

I feel your frustration, Annu. I’m glad, though, that you confirmed the motor short as that eliminates any remaining doubt in that area and looks as if I was wrong in insisting that the brake module

Cliff, turntable is not on the saw, rather saw is on the turn table Imran

I don't use a spindle sander much but have an old State T150 which was the earlier version of the T5.. Both had a tilting spindle and sleeves from 1/4-4". The best spindle sanders made in the US were

I gotta ask.?? What? does one do with a turn table on a sliding saw? or any table saw?

Dmitry, I haven't seen the Jr. in action, but larger versions yes. The primary benefit is speed of throughput. You have to press a lot of veneer to justify that. Our 5x10' vacuum press is in use more

This is the spindle sander I have - not the most refined piece of gear, and not for heavy production, but it works well and costs less than the aluminum sanding heads for the shaper: David Best

If you’re talking about these sanding heads, I think you’ll be disappointed. They rotate entirely too fast and do not oscillate. A bobbin sander is a much better alternative. David Best

I would imagine it has enough ommph , they have been selling the junior for a long time. 2 things it looks low, you will be bending down when you put your panel in. The one I used we had the (well one

I do have vacuum bag but I’m really wanna understand statistic psi vs vacuum bag and hot press. It’s Joos junior is give away enough psi Elegance Custom Cabinetry Minneapolis, Minnesota Regards

I am not familiar with this but it will not do curved (vertically) work like a vacuum bag. Maybe, that is not important to you. Imran

More than likely yes, I used to work in the veneer room of a very high end custom corporate furniture company and we had a much larger version, the heat will have you pressed up and ready to go in no

Nope, Just the 4 speeds everyone else has...? 3500 rpm is kind of high and the smallest radius is 45mm. May be a little limited. Does anyone else use one? PK

Hi guys , Anybody seen that press in action ? U think it’s enough pressure for veneer and preduce better quality pressure vs vacuum bag ? Elegance Custom Cabinetry Minneapolis, Minnesota Regards

I got format4 z45 Use too using a lot since I got CNC h08 don’t use much. All curving start cutting on Cnc. Elegance Custom Cabinetry Minneapolis, Minnesota Regards Dmitry Ivanovs .

JM, Thanks for the feedback. I suspect the same, i.e., label has the start cap value. Not sure why the field name “cond” - likely stands for conditioning. Not sure know what else could it be.

Look for a private msg from imranindiana. Imran

Dmitry, I was warned to stay away from the sanding drum kit on shaper due to RPM being too high. Do you have variable speed on shaper? Imran

Hi, Cleveland area but willing to drive.

Dmitry, Didnt know that was an option for my KF700SP that is on the way Is!? Is the fact that is is non oscillating going to make it less usable? PK

Overkill !! Why not just buy head for shaper from felder different diameters. That’s what I’m using if need it Elegance Custom Cabinetry Minneapolis, Minnesota Regards Dmitry Ivanovs .