¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Messages
Single Messages Topics Expanded Polls

Re: Spindle Sander

 

¿ªÔÆÌåÓý

I don't use a spindle sander much but have an old State T150 which was the earlier version of the T5.. Both had a tilting spindle and sleeves from 1/4-4".? The best spindle sanders made in the US were from Kindt Collins.? Dave

From: [email protected] <[email protected]> on behalf of david@... via groups.io <david@...>
Sent: Saturday, January 16, 2021 10:39 PM
To: [email protected] <[email protected]>
Subject: Re: [FOG] Spindle Sander
?
This is the spindle sander I have - not the most refined piece of gear, and not for heavy production, but it works well and costs less than the aluminum sanding heads for the shaper:




David Best

https://www.instagram.com/davidpbest/











On Jan 16, 2021, at 7:30 PM, david@... via <david@...> wrote:

If you¡¯re talking about these sanding heads, I think you¡¯ll be disappointed. ? They rotate entirely too fast and do not oscillate. ? A bobbin sander is a much better alternative.

<screenshot_4651.jpeg>




David Best







On Jan 16, 2021, at 5:44 PM, Dmitry Ivanovs via <divanov2@...> wrote:

Overkill !! Why not just buy head for shaper from felder different diameters. That¡¯s what I¡¯m using if need it?

Elegance Custom Cabinetry?
Minneapolis, Minnesota?

Regards?

Dmitry Ivanovs .

On Jan 16, 2021, at 16:08, PK <paul.kellymjc@...> wrote:

?I know I am reviving an old thread, but...

I was looking at the Laguna and Delta newer floor standers as they have a trunnion tiliting mechanism so the table stays flat.? Thoughts?

<Screenshot 2021-01-16 140249.png><Screenshot 2021-01-16 140708.png>

Thoughts?

PK


Join [email protected] to automatically receive all group messages.