I would imagine it has enough ommph , they have been selling the junior for a long time.
2 things it looks low, you will be bending down when you put your panel in. The one I used we had the (well one of them) glueup/layup table in front of it and the platten was a bit higher, I can¡¯t remember how much but we had to lift the panels to get them in. Our substrate was 1¡± or 1.25¡± mdf - wouldn¡¯t want to bend down loading one of those. ?We also had to put in spacers to fill in the dead space, not sure if it was because ours was so big (5¡¯ x 10¡¯ i think) but not really a big deal - just some squares of the same thickness in the corners and here and there depending on the unfilled space. But the awesome thing is you don¡¯t need plattens for the panel you are glueing up and it is fast because of the heat.?
toggle quoted message
Show quoted text
On Jan 16, 2021, at 9:57 PM, Dmitry Ivanovs via groups.io <divanov2@...> wrote:
?
I do have vacuum bag but I¡¯m really wanna understand statistic psi vs vacuum bag and hot press. It¡¯s Joos junior is give away enough psi Elegance Custom Cabinetry Minneapolis, Minnesota Regards Dmitry Ivanovs .On Jan 16, 2021, at 20:46, imranindiana via groups.io <imranindiana@...> wrote:
?I am not familiar with this but it will not do curved (vertically) work like a vacuum bag. Maybe, that is not important to you.
Imran
On Jan 16, 2021, at 9:32 PM, Dmitry Ivanovs via groups.io <divanov2@...> wrote:
?Hi guys ,
Anybody seen that press in action ?
U think it¡¯s enough pressure for veneer and preduce better quality pressure vs vacuum bag ?
Elegance Custom Cabinetry
Minneapolis, Minnesota
Regards
Dmitry Ivanovs .
<image0.jpeg>
<image1.jpeg>
