开云体育

The Wixey has a magnet on the side for attaching to the fence head. Easy to move out of the way when tilting the head. [email protected]> wrote:

Imran's questions: (My answers are in Times New Roman) did you buy this model? YES https://infiniter.com/vlm-520-28-lpt-economical-direct-green-line-laser-module-wavelength-520-nm/ how wide is the

Here's a picture of the arms and you can see how it "curves and is not flat..

Thank you kindly.. Jason..I did quite a few things differently on the 2nd chair.? the first chair with the thinner arms, leans back more.? I purposely moved the upper legs forward more so the chair

Mark, sometimes i ask the question just to have an answer documented here. i am not sure what my plan is. too many more compelling things ahead of adding DRO to the rip fence ? Imran

I don’t know how the wixy works but the accurate technology reader i had was “keyed” to the encoder rail so you would have to disconnect a cable from he head to do that, doable but for me a

Mark, That is the reason I asked the question of how it is attached to the fence housing. If it is done with a magnet then one could separate for flipping the fence, which I also do often enough.

Hi Randy, Really nice work! Can you post the two of them together from the same angle? Besides the difference of the accent woods, the main change I see is in the arms. I personally find them to be a

Wixey is not a “mag” strip dro, it uses an encoder rail which means the dro head and/or reader and rail are “connected” which means if you want to flip the fence out of the way you can’t

mkornell, Thanks for sharing. how is the wixey display attached to the fence housing? imran

Randy, the chairs are stunning, thank you for the inspiration, well done ! Cheers Peter Cape Town

Newish Felder owner, first time posting... I bought a K700P this summer and added a Wixey DRO to the rip fence. The Wixey head and mag strip don't fit the extrusion on the front edge of the table, so

Hi Cindy, did you buy this model? https://infiniter.com/vlm-520-28-lpt-economical-direct-green-line-laser-module-wavelength-520-nm/ how wide is the line with your setup? are you able to easily see

I bought one of the Quatron economy green line lasers and mounted it to a 9' ceiling over my saw. It makes a long bright green line right along the blade. Thank you to whoever started this thread for

Thanks everyone for the kind comments.? I have 2 more rockers in production, but they are the classic Maloof..1 is in Birdseye maple and the other is in a really cool figured walnut.? Both will be

Hi Randy, Very good idea to build a second rocker, as you will need this to sit on when admiring the awesome craftsmanship that you have put into first rocker, after awhile you can switch and admire

Wow Randy not only are you skilled but quick. It seems you just posted the last chair. Nice work. Philip Davidson

To totally missed the rip fence part... yea that one is real easy Regards, Mark https://www.instagram.com/kessler_woodworks/?hl=en

I make a crosscut fence DRO but nothing for the rip fence. It’s honestly so easy, you stick the banding into the extrusion on the machine and make a little l bracket out of some angle aluminum and

Randy Very nice is it comfortable? Thanks for sharing Mac,,,l martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330