开云体育

Bill, I saved this info that was posted here. Not sure which Mark is it, maybe we will find out. Also look up noble artisan on utube where a FOG member has done this as well. Imran Start of saved msg

Just finished installing a zero clearance insert from ramonvaldezfinefurniture.com. ?It’s a significant improvement over the factory insert. ?As you can see it adds a significant amount of support

Thanks for all the feedbacks, Yes, I am completely new to those DRO stuff, so I am ok with all the information I can get. I believe I got the Wixey and pro scale solution type: you need an additional

Yes the wixey and accurate tech use an encoder strip that have a printed circuit on them where as the Fiama and the like use a mag strip, I believe the mag strip provides better resolution and real

Thanks Bill. I have digital angle cube thingy from Wixey for cannot recall how many yrs and have not changed batteries. Remember reading about batt drain on some similar DRO maybe it was accurate but

Thanks Mark. I was fairly sure that is what you meant. Wixey has a msg strip but it is attached to a bar that reader goes upon. I assume the reader they are using is not as sophisticated as the higher

Imran, Now I am confused, partially because I can’t construct a proper sentence, have proper grammar or know how to spell but let me guess that this is what you are saying and is what I meant, with

Imran, I’ve had many Wixey read outs and quite sure the batteries last at least a year or two. Certainly nothing like the cheap digital calipers that require batteries every 2 months... Bill

Mark, “Also if you do do a non mag strip unit like the wixy“ By this you mean that it does not work with a mag strip that one could install in OEM fence, correct? Because, it does work with a mag

I meant 10-15 hrs a week... Regards, Mark https://www.instagram.com/kessler_woodworks/?hl=en

Hi Bob, Thanks, that dog catches more snakes, moles, birds then any dog we ever had just hoping she doesn’t run into the black bear that has been roaming around getting into everyones trash...

Yea guys, I am totally sold. I wouldn't have been in the past, ironically now that I am no longer doing it for my main source of income I need my limited time in the shop efficient, I found that the

Mark, the videos links were inserted because the OP does not appear to have the knowledge both you and I have and needs material links to answer those questions. We would not need the links because we

I had an accurate technology scale for almost 20 years always worked, used it on slider xcut and rip and at one point on a cabinet saw. I have had to flip the rip several times due to extra long xcut

I used a length of rip fence that is 200mm long and it sits on the rip fence head with no need to rotate it out of the way and if I want to rip I fit a full length fence to do that. It is a very rare

The saw owner in that link copied my set up and I found it searching the internet some years ago. The Wixey works well and as a magnet is the only attachment to the rip fence head absolute precision

I like ur pics, even the green snake! Nice work Rgrds Bob F

Probably precise enough, I have heard good things about them but I think they are cheap and wouldn’t buy another, as I have also used higher quality ones. I would just spend the $350 or so for the

I saw on another forum someone who put a wixey digital fence for the rip fence on a K3. https://sawmillcreek.org/showthread.php?265132-Yet-another-quot-Help-me-buy-a-sliding-table-saw-quot-Thread I am

I went down this path a few months back .. Aigner stopped making them and none are in stock. They are a rare gem. ALSO the pressure jaws are no longer made although a few are still is stock until