开云体育

Two parallel guides with built in measurement like the Felder units, I don't know if Brian's parallel guides have measurement, Macs clamps or any clamp mounted to the slot and you can accurately

link does not work for me

Easy to make a F & F jig with accurate stops and there are several approaches. Instead of the standard T Track that Steve Rowe uses in the video I used the Incra track system with the Shop Stop which

I recently came across this video: https://www.youtube.com/watch?v=uVUgjr_Iw1w https://www.youtube.com/watch?v=uVUgjr_Iw1w This is a followup video from the guy who also has a video on how he makes

I don’t have the M18 Fuel, just a regular M18 drill and M18 impact. Very happy with both. Recently I picked up the M18 LED Search Light. It was $100. It doesn’t come with batteries or a charger. I

This is the DRO on my 2017 KF700sp, same as the DRO on David Best’s Kappa 400. IMO, DRO is not very useful without micro adjustment. I use micro adjustment all the times to get to the exact spot, it

Glen get the basics so you can get the machines setup. Keep it simple to start, most Felder blades work really well and will get you started and are typically easy to aquire. If you want some wacky

Dave Davies - I’m still waiting for that photo you promised of the Thickness Stop with “analog measurement unit”. Did you forsake me? David Best

This is indeed confusing and news to me if they’ve changed the digital stop configuration when applied to the 700-series machines. Felder is always changing things without telling anyone outside the

Mark, I am following your venture here. I am where your at.. make choices. I can tell you without the people here I would have made some bad decisions. I have learned more from this forum than

Liz Rogers directed my attention to the digital stops and cross cut fence option for the Felder 700 series machines today. She noted that the setup that is paired with the Kappa series is different

It is a done deal. I am not to worried about it being I have no shaper tooling of any kind I will just standardize on that size. Forever walking the wrong side of the tracks.

This is a good idea. Have them swap out the spindle if you can. David Best

That video illustrates the use of the precision miter guide well, but keep in mind, the crosscut fence being used on this K700 saw is the non-digital (i.e. Analog) fence, and it’s easier to position

David's explanation is the best I have ever seen. I think what you really have to ask your self is what type of work are you going to do with it and will it help that process? Projects in my shop seem

https://youtu.be/LVYUss6pJqQ This is a very good Felder video demonstrating the technique using the slider, you can find the use of miter index at around 7 minute. I have the miter index with length

Anyone knows of a video(s) where one can observe/watch the "Precision mitre guide with length compensation - Option 173" at work? I can picture the procedure after reading David's description, but a

My guess is that the pictures are treated as attachments and as such, they are not permitted according to the statement on the group's homepage. "Attachments are not permitted." Consequently, they are

Hey Mac I have a Milwaukee 1/2” drill driver for about two years good wrist snapping torque ! It has served me well I’ve got the extension on the slider mounted I will have to send you pictures

It is not just you. I cannot see the pictures either. I can see the pictures Joe and Mac sent in their email. I believe they send email with picture using iPhone. James