Re: Crazy Horse panel cart
I did not see this link in other posts, but this seems to be the website where one can select the Crazy Horse and then add it to the cart and then proceed to checkout! ?FYI.
For me, I do not have a lot of space in my shop anywhere close to what is on the youtube video. ?I store 4x8 plywood away from where my saw is located, and when I need to cut down a plywwood sheet, I then hand carry it over to the saw. ?My only possible alternative would be a panel cart as the width requirement is far less than the 4 ft plus clearance needed when the sheet is flat. ?When I am at the machine, being able to fix the slider and then position the panel is always awkward, and if this compact Crazy Horse will make that as easy as it looks on the youtube video in my shop where I have less space surrounding my saw, then that would be great!
|
Re: groups.io for Felder Woodworking?
John does a better moon-walk though.
|
Re: groups.io for Felder Woodworking?
Might as well be - ?Michael Jackson and Renzetti participate here about the same amount. ? :-P
David Best
toggle quoted message
Show quoted text
I thought it was Michael Jackson? Designing and building for 47 years ?
I know the fate of the Yahoo group has been discussed before, and I know it's a non-trivial issue, but I've noticed a bunch of Yahoo groups recently moving to??and people seem to be pretty happy with it.
Just curious if folks here have looked at it.? ?I'm not sure who actually "owns" the Yahoo group.? Is it Brian?
Mark
??
|
Re: groups.io for Felder Woodworking?
John Renzetti actually owns the group.
toggle quoted message
Show quoted text
I know the fate of the Yahoo group has been discussed before, and I know it's a non-trivial issue, but I've noticed a bunch of Yahoo groups recently moving to groups.io and people seem to be pretty happy with it.
Just curious if folks here have looked at it.? ?I'm not sure who actually "owns" the Yahoo group.? Is it Brian?
Mark
??
|
Re: groups.io for Felder Woodworking?
I thought it was Michael Jackson? Designing and building for 47 years
toggle quoted message
Show quoted text
On Jan 8, 2018, at 2:46 PM, murkyd@... [felder-woodworking] < felder-woodworking@...> wrote:
?
I know the fate of the Yahoo group has been discussed before, and I know it's a non-trivial issue, but I've noticed a bunch of Yahoo groups recently moving to and people seem to be pretty happy with it.
Just curious if folks here have looked at it.? ?I'm not sure who actually "owns" the Yahoo group.? Is it Brian?
Mark
??
|
groups.io for Felder Woodworking?
I know the fate of the Yahoo group has been discussed before, and I know it's a non-trivial issue, but I've noticed a bunch of Yahoo groups recently moving to groups.io and people seem to be pretty happy with it.
Just curious if folks here have looked at it.? ?I'm not sure who actually "owns" the Yahoo group.? Is it Brian?
Mark
??
|
Re: Rip fence locking lever
Thanks Brian
Sorry I should have said it's a 2015 K700s (and yes it locks onto the round bar)
I'll have to study my parts diagram and see if i can make any headway. I was hoping someone had already been down this road!
Stephen
?
Stephen,
I went out and looked at my KF, I assume you are talking about the model that locks onto the round bar? I had too much stuff in the way to pull the whole head off the bar, but it appears that the plastic lever cams over and pulls the sheet metal yoke tight against the bar. I could see real well, but there appears to be several screws in the area of where the lever hits, so maybe they are some sort of adjustment. My parts list doesn¡¯t show this particular set of parts as this was a retrofit situation on the 2001 machines that came with an aluminum rip fence head that was completely different.
Hi
The locking lever on the rip fence of my K700s has always been very tight, it requires a lot of force to lock it. I'd like to slacken it just a bit so that I can lock it down easier.?
Any guidance as always will be much appreciated.?
Regards
Stephen
|
Re: Rip fence locking lever
Stephen,
I went out and looked at my KF, I assume you are talking about the model that locks onto the round bar? I had too much stuff in the way to pull the whole head off the bar, but it appears that the plastic lever cams over and pulls the sheet metal yoke tight against the bar. I could see real well, but there appears to be several screws in the area of where the lever hits, so maybe they are some sort of adjustment. My parts list doesn¡¯t show this particular set of parts as this was a retrofit situation on the 2001 machines that came with an aluminum rip fence head that was completely different.
toggle quoted message
Show quoted text
Hi
The locking lever on the rip fence of my K700s has always been very tight, it requires a lot of force to lock it. I'd like to slacken it just a bit so that I can lock it down easier.?
Any guidance as always will be much appreciated.?
Regards
Stephen
|
Hi
The locking lever on the rip fence of my K700s has always been very tight, it requires a lot of force to lock it. I'd like to slacken it just a bit so that I can lock it down easier.
Any guidance as always will be much appreciated.
Regards
Stephen
|
Re: Comatic Smart Stand digital readout
David, ? ?What is the?Hans & Dieter alternative? Thanks, Dave
?
Joe,
You¡¯re welcome.? I¡¯m glad it assist you through the everglades. ? May your DRO guide you to fresh water, quiet comfort and a good stiff gin martini. ? Let me know when you might like to try out the Hans & Dieter alternative to Fritz & Franz - it¡¯s digital now you know. ??
David Best
David,
Thanks so much for making and sharing this installation primer!
I am planning to install the kit this weekend.
Your help has made my shop so much better!? Every time I use the Rong Fu with DRO I think of you and how much easier you have made things for me in my shop!? I plan to finish up the repairs on the Maweg sander soon, I wish I had had the parts when you were in New Orleans.
Thanks again and Happy New Year!
Joe in New Orleans
The Comatic Smart Stand height DRO kit is about $120 plus shipping. ? Here is a link to the installation process.
Enjoy, and happy new year.
David Best
It has been several months since I paid for it but I think it was somewhere around $120.? It was a special order so I don't think Kyle stocks it. Steve
-- Dave & Marie Davies
318-219-7868
|
Re: Comatic Smart Stand digital readout
Joe,
You¡¯re welcome. ?I¡¯m glad it assist you through the everglades. ? May your DRO guide you to fresh water, quiet comfort and a good stiff gin martini. ? Let me know when you might like to try out the Hans & Dieter alternative to Fritz & Franz - it¡¯s digital now you know. ??
David Best
toggle quoted message
Show quoted text
David,
Thanks so much for making and sharing this installation primer!
I am planning to install the kit this weekend.
Your help has made my shop so much better! ?Every time I use the Rong Fu with DRO I think of you and how much easier you have made things for me in my shop! ?I plan to finish up the repairs on the Maweg sander soon, I wish I had had the parts when you were in New Orleans.
Thanks again and Happy New Year!
Joe in New Orleans
The Comatic Smart Stand height DRO kit is about $120 plus shipping. ? Here is a link to the installation process.
Enjoy, and happy new year.
David Best
It has been several months since I paid for it but I think it was somewhere around $120.? It was a special order so I don't think Kyle stocks it. Steve
|
Hi
The locking lever on the rip fence of my K700s has always been very tight, it requires a lot of force to lock it. I'd like to slacken it just a bit so that I can lock it down easier.
Any guidance as always will be much appreciated.
Regards
Stephen
|
Re: FELDER FOR SALE New style trunnions vintage 2008
Greetings: Owner has decided to also sale machines separately. Please respond off the FOG? thanks mac,,
? martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330 cell 608-824-0023 fax
Designing and building for 48 years
From: "mac512002@... [felder-woodworking]"
To: felder-woodworking@...
Sent: Sunday, December 31, 2017 11:13 AM
Subject: [felder-woodworking] FELDER FOR SALE New style trunnions vintage 2008
?
Greetings : Happy New year to all!! I have a very nice Felder Shop for sale, Please see link below . It is also last day of my Airtight clamps sale.
Please contact me off the FOG
Regards mac,,,
martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330 cell 608-824-0023 fax Designing and building for 48 years
|
Re: Comatic Smart Stand digital readout
David,
Thanks so much for making and sharing this installation primer!
I am planning to install the kit this weekend.
Your help has made my shop so much better! ?Every time I use the Rong Fu with DRO I think of you and how much easier you have made things for me in my shop! ?I plan to finish up the repairs on the Maweg sander soon, I wish I had had the parts when you were in New Orleans.
Thanks again and Happy New Year!
toggle quoted message
Show quoted text
The Comatic Smart Stand height DRO kit is about $120 plus shipping. ? Here is a link to the installation process.
Enjoy, and happy new year.
David Best
It has been several months since I paid for it but I think it was somewhere around $120.? It was a special order so I don't think Kyle stocks it. Steve
|
Re: Comatic Smart Stand digital readout
The Comatic Smart Stand height DRO kit is about $120 plus shipping. ? Here is a link to the installation process.
Enjoy, and happy new year.
David Best
toggle quoted message
Show quoted text
It has been several months since I paid for it but I think it was somewhere around $120.? It was a special order so I don't think Kyle stocks it. Steve
|
Re: Felder Widebelt Sander Belt Storage Option
Hi Joel, I checked out your pictures and really like the design you came up with. I think I¡¯m going to borrow it. My wide belt isn¡¯t a Felder so I may come off the ceiling instead of attaching to the machine. I checked Woodcraft and the 3 1/2¡± Forstner bit is $36.00 plus shipping and tax. I think I¡¯ll just use a piece of the ABS pipe on end to draw a circle, jig saw it close and then use the spindle sander to sand to the line. On a side note I see you have a Ridged spindle sander. ?I have one also. Don¡¯t use it much,but since it only cost $200 and works well, it earns it¡¯s keep. Thanks for sharing,George Gerstner?
toggle quoted message
Show quoted text
On Jan 1, 2018, at 2:36 PM, joelgelman@... [felder-woodworking] < felder-woodworking@...> wrote:
?
I just completed a wedding gift project that took so long for a variety of reasons that the couple has ?2 children. ?I posted a few picture of in a new album but then main reason for the album and this thread is to share an ides that has been a nice space saver for me. ?Now that my project is done, I am spending some time on the shop to better organize my things.
On the Felder widebelt sander, I had a variety of belts and I did not want to dedicate wall space for use of handing the belts (better to use that for lumber storage) and so I built storage across the outfeed side of the sander.
What was helpful was the bolts on top that are to be used for crane machine lifting. ?They are M16 and I got 2 M16 nuts and 2 strong tie column bases. ?That provided the support for the wood that would be used to connect to 3 inch ABS pipe. ?The holes were drilled with a 3 1/2 inch Forstner Bit available at woodcraft followed by a slight sanding with the spindle sander. ?The holes were drilled 5 inches apart, but if I could do it over again I would allow just a bit more space. ?to find tune the pipe for any slight tilt, I added some adjustment bolts as shown in 1 of the photos. ?
I now have a way to store 5 belts in a very convenient location using space that would otherwise go unused.?
Just a thought in case anyone was interested.
|
Felder Widebelt Sander Belt Storage Option
I just completed a wedding gift project that took so long for a variety of reasons that the couple has ?2 children. ?I posted a few picture of in a new album but then main reason for the album and this thread is to share an ides that has been a nice space saver for me. ?Now that my project is done, I am spending some time on the shop to better organize my things.
On the Felder widebelt sander, I had a variety of belts and I did not want to dedicate wall space for use of handing the belts (better to use that for lumber storage) and so I built storage across the outfeed side of the sander.
What was helpful was the bolts on top that are to be used for crane machine lifting. ?They are M16 and I got 2 M16 nuts and 2 strong tie column bases. ?That provided the support for the wood that would be used to connect to 3 inch ABS pipe. ?The holes were drilled with a 3 1/2 inch Forstner Bit available at woodcraft followed by a slight sanding with the spindle sander. ?The holes were drilled 5 inches apart, but if I could do it over again I would allow just a bit more space. ?to find tune the pipe for any slight tilt, I added some adjustment bolts as shown in 1 of the photos. ?
I now have a way to store 5 belts in a very convenient location using space that would otherwise go unused.?
Just a thought in case anyone was interested.
|
Re: FELDER FOR SALE New style trunnions vintage 2008
I am also in the market for a used saw/shaper with 10' slider.
|
Re: FELDER FOR SALE New style trunnions vintage 2008
I wish, I am headed for a KF700 like that but have no room or need for the other 2 pieces. A nice deal for someone!
Mark
|
FELDER FOR SALE New style trunnions vintage 2008
Greetings : Happy New year to all!! I have a very nice Felder Shop for sale, Please see link below . It is also last day of my Airtight clamps sale.
Please contact me off the FOG
Regards mac,,,
martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330 cell 608-824-0023 fax Designing and building for 48 years
|
David P. Best
imran
Mark Foster