开云体育

The suction idea is very interesting. I can experiment with that. I will also do other checks on the alignment. This version of the saw does not have a typical throat plate. I believe this is due to

In addition to David’s thorough response, I’m just confirming that when you perform through cuts you have your saw blade raised enough so that only a minimum of teeth is engaged in the material

It could be that the suction of your overhead guard is pulling the off-cut upward and into the blade. Or it could be that the throat plate supplied by Felder does not have tight tolerance to the

David, I am not getting burn marks on the off-cuts. I am using a SilentPower 30-tooth Universal blade (model 03.02.35030). I am using a roving knife, and I believe I have it installed

Do you get burning on the off-cut side (to the right of the blade) if the material is clamped down to the slider? What blade are you using and do you have a rivving knife installed and properly

I am about to re-check the alignment of the slider on my saw. I thought I had it pretty well tuned up, following the David Best videos, but am seeing some unexpected behavior. Small offcuts tend to

It appears to be the same technology as used in my Oneida device. Price point is similar. The issue I have had with mine is failure to keep the sensor clean. Other than that I have been happy with

As for the 500V, I have the older version and a good friend has the newer version. ?I think having some experience working with my Barth 500V motivated him to get one. ?He likes his better. ?This

Does anyone have any experience with this product? ?I know Alex Boulds had mentioned the product was in development a year or so ago, but I haven't been able to find any reviews online. ?I'm

Hi Karl, Thanks for the suggestion, I might just do that. ?Fortunately, we are in no hurry…. $500 bucks could by a lot of Gin & Tonics! Cheers, Mike M.E. Blake General Contractors

Lol now I get it thanks

? ? David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/ https://www.youtube.com/@David_Best

its on the main body its not dedicated my friend just designed that for me?

Isn’t that what the holes in the outfeed table are for? -- John Hinman Boise ID Kappa 450X and A941

Hey guys I got something here in case you have some level of OCD like me this is 3d printed tool holder for my kappa450x but I'm? pretty sure it will work with other models if any one is interested

Unless you need it immediatley, I've waited for the recent "Free Shipping" promotions for those items that are expensive to freight. Next one is likley 4th of July. -Karl

I just got a brand new FD250 variable speed with a lenze vfd. It looks like it has a keyboard input but that was probably for calibration at the factory [email protected]> wrote:

Thanks Joel, this is a very ingenious use of the space indeed! Anil

All folks I have helped so far have older machines and all have Lenze VFD. I am helping a member in UK whose Lenze VFD needs to be replaced. So asking this question to find out if there is a Felder

Hello, Here’s a question for someone in the Seattle/Portland area. We are considering adding a pleated air filter to our AF22. ?After getting a quote from Felder, they want $500.00 to ship a