ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
esc to dismiss
Re: AD941 dust hose attachment
¡° ?Some have mentioned they use Felder¡¯s right angle adapter, but I don¡¯t see the need on my situation to use a right angle adapter.¡±
Above may be true for you but just want to be sure that you have gone thru the mechanics. The right angle adapter works great for me both in jointer and planer modes. It routes the hose just as I would like. Even though mine is dual 51 concept is same. I use 2 separate hoses (thanks to David Best) for jointer and planer and both are standard 5¡± spiral hoses.
The pics illustrate the benefit to me for the right angle connector.
?Jointer:
Planer: This is important because you want the hose to go up, otherwise it will be in the path of outfeed.
toggle quoted message
Show quoted text
On Jun 28, 2023, at 11:48 AM, Wade Dees <wjdsignature@...> wrote: ? Hi Bob Wise,
I¡¯m just connecting flex ducting that has the reinforced spiral wire that coils through it. Wanting to make a direct attachment. ?
Some have mentioned they use Felder¡¯s right angle adapter, but I don¡¯t see the need on my situation to use a right angle adapter. ?Just a straight tapered adapter would suffice. ?
Thx,
Wade On Jun 28, 2023, at 8:36 AM, Bob Wise <bob@...> wrote:
? What material are you using? On Wed, Jun 28, 2023 at 8:35?AM Chris Reyerson < reyerson@...> wrote: I use my 3D printer to grow a adapter between the machine port and the hose I use.? A 3D printer has all kinds of uses in a wood shop for things like this.
Chris?
|
Re: AD941 dust hose attachment
I agree and would appreciate if Rod could at least include the one message above to reference the conversation.
Brian Lamb
blamb11@...
www.lambtoolworks.com
toggle quoted message
Show quoted text
On Jun 28, 2023, at 10:29 AM, Wade Dees <wjdsignature@...> wrote:
James,
I totally understand what you¡¯re saying. ?On other subjects I grip get lost without the previous or ongoing email threads attached.?
But luckily this is from my post subject and I knew what he was saying. ?
???
Wade
On Jun 28, 2023, at 10:24 AM, James Zhu <james.zhu2@...> wrote:
? I find the email response without the previous conversation is confusing and sometimes completely lost.
James Yes, the right angle connector has a taper, they are very snug.
Regards, Rod
|
Re: AD941 dust hose attachment
James,
I totally understand what you¡¯re saying. ?On other subjects I grip get lost without the previous or ongoing email threads attached.?
But luckily this is from my post subject and I knew what he was saying. ?
???
Wade
toggle quoted message
Show quoted text
On Jun 28, 2023, at 10:24 AM, James Zhu <james.zhu2@...> wrote:
? I find the email response without the previous conversation is confusing and sometimes completely lost.
James Yes, the right angle connector has a taper, they are very snug.
Regards, Rod
|
Re: AD941 dust hose attachment
I find the email response without the previous conversation is confusing and sometimes completely lost.
James
Yes, the right angle connector has a taper, they are very snug.
Regards, Rod
|
Re: Troubleshooting Problems with Felder Machines
You buy a used straight edge from eBay
|
Re: AD941 dust hose attachment
Yes, the right angle connector has a taper, they are very snug.
Regards, Rod
|
Yes, it should have had to be approved by a moderator. All new posters have to be moderated for the first few posts. I can only assume it is a glitch in the Groups software. First time it has happened, I deleted them as a member and will contact Groups if it happens again.
Brian Lamb
blamb11@...
www.lambtoolworks.com
toggle quoted message
Show quoted text
On Jun 28, 2023, at 7:24 AM, Jim Fleming <jameshfleming@...> wrote:
Looks like spam/scam.? Should be moderated or blocked?
|
Re: AD941 dust hose attachment
Wade, I use these adapters on my 120mm ports for the Kappa 400, HS950 and AD941 along with 100 other people.
They work. If for some odd reason they don't work for you, I'll take care of the problem.
Bill
Hi Bill Belanger,
So the larger end of your 120mm adapter will fit over the plastic housing on the machine, but do you know if it¡¯s a snug fit?? Does the 120mm end have any taper to it?? I¡¯m wanting that connection to be just about semi permanent. Only because of the flipping action of the hose back and fourth to change operations.? Maybe I can use a pop-rivet gun to secure it, unless it¡¯s soft enough to use a hose clamp to really hold it in there well. ?
Thx,
Wade
On Jun 28, 2023, at 8:25 AM, Bill Belanger <bllblngr@...> wrote:
|
Bill Belanger?
?I used 5¡± hose, which works with the Felder right angle connector?
Regards, Rod
I removed this poster, not the right forum. Not sure who approved his message¡ can¡¯t find it in the moderator activity.
Brian Lamb
blamb11@...
www.lambtoolworks.com
toggle quoted message
Show quoted text
On Jun 28, 2023, at 5:29 AM, Group Notification <irealty@...> wrote:
A new poll has been created:
ROCHE COMPANY HIRING
Data operator is needed as a member of staff to be employed to enter or update data on a computer/laptop or on your phone, %100 strictly online work from home job and its flexible hours of work pay of $30/hr, payment is weekly or bi-weekly.. Send an email if interested to.
?
rochehirenicho (at) gmail.com
1. Send an email
2. Send an email
Click Here To Vote
Do not reply to this message to vote in the poll. You can vote in polls only through the group's website.
|
Re: Shortening a bandsaw blade
Any competent saw blade shop should be able to cut and re-weld that blade. Find one local to you, this is who I use here in Phoenix:
| |
Brian Lamb
blamb11@...
www.lambtoolworks.com
toggle quoted message
Show quoted text
On Jun 28, 2023, at 3:37 AM, Mike D. via groups.io <mjcdorsam@...> wrote:
Recently, I purchased a carbide-tipped bandsaw blade from Starrett, but?mis-read the description - leading to a 13¡¯ 4¡± blade for my 13¡¯ N4400. A rather expensive senior-moment without reading glasses.
Starrett won¡¯t exchange the blade, and the current sense is they no longer provide repair services - Customer Service is looking into this.
Any help is appreciated.
Thanks.
--
Mike D.
Annapolis, MD
AD951; K700S; N4400
Re: P coupling Felder adapter to Hammer
I have been selling for years now, parallel fences to fit the Hammer and Minimax machines that bolt to the t-slot in the side of the slider. I do limit the width to roughly 25¡±-26¡± of support and no issues that I have ever heard of. I would not hang the Felder 1M extension on any sort of adapter on the Hammer slot arrangement, that would be asking for trouble.
Brian Lamb
blamb11@...
www.lambtoolworks.com
toggle quoted message
Show quoted text
On Jun 27, 2023, at 10:50 PM, bram.baert@... wrote:
Hi Nathan,
Over a year ago I was also playing with that idea and whipped up a quick prototype as can be seen in the picture below. It is/was the goal to make some 3d printed parts and use the VEIKO T ruler () To date, I didn't spent the time to get the design forward. Currently I am just using a stop block that I fix with an F-clamp. I fixed it on the top T-slot as I have my doubts about the strength of the side mounted T-slot when it comes to being loaded with a 60-70 cm plywood panel. Does anybody have experience with load capabilities of the side of the sliding table on a Hammer?
<20230628_073452.jpg>
Regards
Bram
|
Re: AD941 dust hose attachment
Hi Bill Belanger,
So the larger end of your 120mm adapter will fit over the plastic housing on the machine, but do you know if it¡¯s a snug fit? ?Does the 120mm end have any taper to it? ?I¡¯m wanting that connection to be just about semi permanent. Only because of the flipping action of the hose back and fourth to change operations. ?Maybe I can use a pop-rivet gun to secure it, unless it¡¯s soft enough to use a hose clamp to really hold it in there well. ?
Thx,
Wade
toggle quoted message
Show quoted text
On Jun 28, 2023, at 8:25 AM, Bill Belanger <bllblngr@...> wrote:
|
Bill Belanger?
On Jun 28, 2023, at 08:22, rodsheridan <riderofgallifrey@...> wrote:
?I used 5¡± hose, which works with the Felder right angle connector?
Regards, Rod
Re: AD941 dust hose attachment
Hi Brett Wissel,
That could be a viable option, Thank You for the heads up.
Wade
toggle quoted message
Show quoted text
On Jun 28, 2023, at 8:25 AM, Brett Wissel <Brettwissel@...> wrote:
? I used a Fernco rubber fitting adaptor?from?a?local plumbing supply house, But can't tell you which one at the moment. It fits over the metal ring on the small side and tapers larger to also fit outside?a 6" spiral flex hose.
Prior to that, I used a similar but different Fernco to adapt to a similar size 4" spiral?flex hose.
It's easy to forget that close enough is good enough because the rubber can/will stretch. But the table specs should help a lot.
Hello FOG,
To all you AD941 owners.? The machine dust hose attachment has an outside diameter of 120mm or 4.72¡±.? The hose I use in my shop has an inside diameter of 110mm or 4.33¡±.? What did you use to adapt the hose to your machine.?
The Felder adapter will not work for my situation.
Thx,
Wade
-- Brett Wissel Saint Louis Restoration 1831 S Kingshighway Blvd (at Shaw Blvd) St Louis, MO 63110 314.772.2167 brett@...
|
Re: AD941 dust hose attachment
Hi Bob Wise,
I¡¯m just connecting flex ducting that has the reinforced spiral wire that coils through it. Wanting to make a direct attachment. ?
Some have mentioned they use Felder¡¯s right angle adapter, but I don¡¯t see the need on my situation to use a right angle adapter. ?Just a straight tapered adapter would suffice. ?
Thx,
Wade
toggle quoted message
Show quoted text
On Jun 28, 2023, at 8:36 AM, Bob Wise <bob@...> wrote:
? What material are you using? On Wed, Jun 28, 2023 at 8:35?AM Chris Reyerson < reyerson@...> wrote: I use my 3D printer to grow a adapter between the machine port and the hose I use.? A 3D printer has all kinds of uses in a wood shop for things like this.
Chris?
|
Re: AD941 dust hose attachment
What material are you using?
On Wed, Jun 28, 2023 at 8:35?AM Chris Reyerson < reyerson@...> wrote: I use my 3D printer to grow a adapter between the machine port and the hose I use.? A 3D printer has all kinds of uses in a wood shop for things like this.
Chris?
|
Re: AD941 dust hose attachment
I use my 3D printer to grow a adapter between the machine port and the hose I use.? A 3D printer has all kinds of uses in a wood shop for things like this.
Chris?
|
Re: AD941 dust hose attachment
|
Bill Belanger?
toggle quoted message
Show quoted text
On Jun 28, 2023, at 08:22, rodsheridan <riderofgallifrey@...> wrote:
?I used 5¡± hose, which works with the Felder right angle connector?
Regards, Rod
Re: AD941 dust hose attachment
I used a Fernco rubber fitting adaptor?from?a?local plumbing supply house, But can't tell you which one at the moment. It fits over the metal ring on the small side and tapers larger to also fit outside?a 6" spiral flex hose.
Prior to that, I used a similar but different Fernco to adapt to a similar size 4" spiral?flex hose.
It's easy to forget that close enough is good enough because the rubber can/will stretch. But the table specs should help a lot.
Hello FOG,
To all you AD941 owners.? The machine dust hose attachment has an outside diameter of 120mm or 4.72¡±.? The hose I use in my shop has an inside diameter of 110mm or 4.33¡±.? What did you use to adapt the hose to your machine.?
The Felder adapter will not work for my situation.
Thx,
Wade
-- Brett Wissel Saint Louis Restoration 1831 S Kingshighway Blvd (at Shaw Blvd) St Louis, MO 63110 314.772.2167 brett@...
|
Re: AD941 dust hose attachment
I used 5¡± hose, which works with the Felder right angle connector?
Regards, Rod
|
AD941 dust hose attachment
Hello FOG,
To all you AD941 owners. The machine dust hose attachment has an outside diameter of 120mm or 4.72¡±. The hose I use in my shop has an inside diameter of 110mm or 4.33¡±. What did you use to adapt the hose to your machine.
The Felder adapter will not work for my situation.
Thx,
Wade
|
imran
rodsheridan
Bill Belanger
Chris Reyerson