开云体育

I made this based on some inspiration here. Bolts on with 1 bolt and I like it a lot better than the countermax. Maybe $70 In clamps and valve etc. Sent from a device with less than stellar

https://relcuttools.com/panelcrafter.shtml Imran, I thought the PanelCrafter was for the arches. James, I looked up the Weaver, which seemed a bit different and made to work with their machinery and

Joel, Weaver makes a similar jig. https://weaver-sales.com/ https://www.youtube.com/channel/UCEcJIqnAXypBFbIGBTXMNWQ/videos James [email protected]> wrote:

I bet Mac would make you the Copecrafter practically functioning, maybe even better, if you offer to pay for it. He might already know the story on them too! [email protected]> wrote:

Hi Joe, I was going to reply earlier that I bid on copecrafter 2 or 3 times on Machinery Max. My primary interest was arch templates and since that is not my favorite style I was luke warm to the idea

No. Brian Lamb blamb11@... www.lambtoolworks.com

It seems that CopeCrafter may be out of business. ?They were made by Reliable Cutting Tools in Texas, and I can't reach them by phone or email and I can't find one new or used from any other source.

Does brand matter? I’d like to find one locally or from Grainger Sent: Friday, May 21, 2021 8:24 AM To: [email protected] Subject: Re: [FOG] Belt size request for 2017 F700Z I believe

Thank you for the link. Have been previously told that it’s worth more than I paid for it. Still haven’t heard back from Jesse, maybe he’s not with them anymore...

I believe metric belt pj559 cross references to us 220j6.

-- Tom Gensmer Heritage Home Renewals, LLC Minneapolis, MN

Good morning Joe! I just checked the shaper unit on my 2020 KF700S, and found the following: -- Motor package is 7.5hp 3P 60Hz -- 1-1/4" spindle -- belt drive is marked as "Rippenband 9 PJ 559" --

I've needed a few parts for the Tannewitz PH bandsaw I'm restoring.? The good news is Tannewitz still has all parts.? The bad news are the prices.? Here are the parts and prices.? Tannewitz

The used 2017 F700Z I bought at auction did not ship with a belt for the 1 1/4" spindle.? The belt for my 2010 Variable speed KF700SP does not fit.? Does anyone know the belt size so I can get one

You will sell the A3-31 in a heartbeat. I sold mine to a FOGger . /g/felderownersgroup/message/103077 But you can also list in Craigslist. You will get a LOT of serious inquiries.

Hi all, I have a call into my rep at Felder, but wanted to ask here as well. I have a 12” A3-31 Hammer Jointer/Planer and a Hammer N4400 17” amongst my woodworking tools that I’m planning to

This guy spent $150 to build the jig like CopeCrafter. https://www.youtube.com/watch?v=WKvfhQYIcq4&ab_channel=BrianCNC James [email protected]> wrote:

When My planer is having feed issues? It is the Table. I have to clean the pitch and resin off it using any cleaner Mineral Spirits works.? You could use 409? or anything really Then I apply a

Hi Joel: Thanks for your reply. I would personally much rather use aluminium extrusion rather than the timber that David Z. has used. This is certainly what I’ve done, following many others. But

Thanks. ?I will be emailing David Best, and hope he will sell me a swing down mount for the pressure jaws along with a micro adjust for the thickness stop. ?Great videos! enclosed a picture of my