开云体育

Jason, I'd love to see a few pics of your guitars.... Stephen

The older F38 were sourced from Steff. I don't know when they changed to Comatic . Dave ________________________________ Sent: Monday, November 2, 2020 12:07 PM To: [email protected]

can you share the diagrams? if it is a hard copy you can take pics of pages. lots of smart folks here (not me) who can provide insight. imran

Freeborn used to make a 5.5mm cutter for undersized ply. Whatever you choose, consider the 5/8 recess. It gives extra glue area and stabilizes the cope and stick and leaves enough room for 1/4" od

Imran, I have an exploded diagram from Felder.? It helps, but since I'm not that familiar with how machinery is built, I'm not sure how to proceed, Joe, I sent a message to Comatic for help, and they

Or use Freeborn back cutter. https://www.oellasawandtool.com/products/FREEBORN-%252d-MC%252d56%252d001-%252d-CARBIDE-RAISED-PANEL-BACK-CUTTER-Shaper-Cutter.html James [email protected]>

I use the ?” groover in the Freeborn stack, and if using a flat panel, I will use ?” material (MDF for paint grade) and profile the back edge of the panel to fit the groove precisely. For that

i have this bushing but have not used it yet. also the chicago woodworking school sale included two of these. not sure if they are sold or not, https://www.toolstoday.com/v-7648-bu-566.html imran

Thanks for all the feedback, I am located in the US (southeast), I was using the Felder terms as I was discussing Felder machines in my messages. I am not accustomed to the "thickness planer" term,

Hi Bill, that is befuddling and i did not expect single purpose jointers to carryover the hinge mechanism. i guess if is cheaper for felder to do so instead of redesign. David has clarified the

I believe you can get top hat bushings from Rangate. Dave Davies [email protected]> wrote:

Hello all, I want to buy a set of Freeborn Cope and Pattern cutters for a cabinet project.? Freeborn gives you the option of choosing the center groover's width and depth of cut.? The standard is

Joe, I believe the purpose of the upper brake was to only activate when tension was released quickly as when the blade breaks. The top wheel locks immediately to keep the blade from chewing up

Felder makes only two stand alone jointers that do not have tables that flip up. They are the A951L and the Format-4 Plan 51L. Both machines employ the cam elevation system on the outfeed table, The

That F38 is a rebranded Comatic I believe. Have you googled with Comatic instead of F38? Sent: Sunday, November 1, 2020 3:17 PM To: [email protected] Subject: [FOG] Felder F38 feeder repair

I bought the A951L and paired it with a D963.? Both are less than 1 year old, so I am unable to make any meaningful statement about reliability.? So far, they have performed their functions well.?

I’ve started disassembly and the brakes apparently changed a lot over the years . On my machine both wheels have brake drums integrated but the lower had no brakes. There is a heavy steel plate that

Bill, where are you located? Given you call a planer what we in US call a jointer, I'm wondering what used machines are available in your region. Euro jointers ( planers ) like Martin, Bauerle, Kolle,

Imran, I based my thought about the A941 and A951 after I reviewed the manual posted in the File section. The manual shows hinges for both A and AD models or I miss read the manual. Maybe someone with

I have not used that disc sander, but I've been using a hand cranked one for years. I teach a class on making Shaker oval boxes every summer on a picnic table in the woods. It became the solution for