开云体育

Ya know Fred help is just across town. My KF 700 has a 8 foot slider…. Mark Foster

It is single speed. I moved the small roller by moving the feed lever shown in the photo below. I haven't had a chance to remove the motor plate yet. Do you recommend that I use something on the side

McMaster has some heavy duty piano hinges that I've used in the past and have performed well. They had a 1/4" knuckle. I would use something like that or just use regular passage door hinges. Jarrett

i have no clue but i imagine the piano hinge on a high quality piano may be of a better quality than std offerings. my only negative on piano hinge, from one use, is that there is more force on the

I’m relatively sure that piano lids weigh more than the doors of your cabinet will weigh even when loaded with tools. At least the lid on my wife’s steinways are pretty hefty.

Piano hinge?

Hi Fred, Got it. for some reason i thought you had purchased a big squeeze clamp, giving me the notion that you have a sliding saw. imran

Hi guys, I am building a (huge) tool cabinet, 42"h x 41"w and about 3/4 thick. I am wondering what kind of hinge I should use to hold the doors. The doors will be about 3.5" deep, everything in hard

You have to get that rusted ring off the studs first. I'm guessing it's been there long enough, and probably slightly stuck in the paint, once it's off you will be able to lift the motor, I can see

Hi Imran:I have a Felder FB600 bandsaw and Hammer A3-31 at home but no slider either at home or work. This is the first time we've had a project that involved cutting this much wood at work.?Fred

Hi Fred, i have been following this and am curious why did you not use your felder saw? perhaps this is at work and saw is at your home. either way, well done ? imran

Nicely done! Brian Lamb blamb11@... www.lambtoolworks.com

Yes, all our equipment has hanging electrical lines. Use properly rated materials and strain reliefs, and twist lock connectors (preferably at shoulder height for easy reach or above your head so you

Acharya, i have not done it but what would be the concern? if there is going to be a receptacle in the ceiling make sure it is one that locks the plug. imran

Sounds a lot like overcurrent protection/thermal cutout since there's clearly a cool down period and it cuts out with load, I don't know where this resides on the 2002 model. I have a 2005 B3 and it's

David you are correct and so is Jeff when he initially asked if belt should go in between the two rollers, looks as if smaller roller/tensioner is attached to link arm that engages the feed by

Jeff, I can’t be sure, but looking at your most recent photo, it appears to me that the belt tensioning may be done via the idler wheel with spring tension, rather than a tensioning system involving

Jeff pry off retainer plate in photo, now that nuts have been removed, this will show you if you have any more travel upwards on what should be elongated holes on machine body. Happy to help after the

I took off the bolts. Here is what it looks like. It's not clear to me what to do next. I do appreciate the help. As you might guess, I've both never done this and am concerned about breaking

Joe, I'm not sure if anyone has mentioned it, but owwm.org, or old woodworking machines, has information on older vintage machines.? Doing a search on "tannewitz ph 30" found 109 matches. Dennis