开云体育

Hi Jim, I used dryer hose from Canadian Tire as a replacement a couple of years ago. Mike

Thanks, Collin I will look into that right away. ?I guess I should look at/ change the belt while I am there? Mike

From what I understand for the US pricing is that Felder has pre built configuration with an associated price. If you pick and choose your own option without hitting those pre built configuration, you

It sounds like the urethane covered drive wheel is starting to disintegrate, change both low and high speed wheels straight away, quite cheap and saves possible damage to elect motor shaft. Sent from

Mike if it is urethane covered drive wheels, it is an easy job to change if you access through inspection hatch on shaper side and then remove access hatch into planer/thicknesser cabinet. Colin Sent

Hi Mike, It sounds like the urethane covered drive wheel is starting to disintegrate, change both low and high speed wheels straight away, quite cheap and saves possible damage to elect motor shaft.

Hello All, I have often thought about the days of the felder group on yahoo and felder discussions on badger pond. ?I am happy to have found this group. I have a CF741P (2003) and just recently I

I bought my KF700 from a Felder exhibition, so I couldn't select any internal options. On the other hand I got a really good price for an almost unused machine.?I cannot help you with prices, but I

I just uploaded the F38 parts list to files/Manuals & Drawings/f38.pdf. A pictorial of the "transmission" is on page 15.? By the way, there are two page 15's that are the same.

Here's two pictures.? The F38 is about 10 years old,? Two of the drive gears cracked into several pieces when I turned the feeder on without a load The drive gear is held in place with 2 snap

I do not think this exists. Mine unit was specked several different ways with different prices, sometimes one option would be more or less expensive depending on what else was purchased. Kinda had me

By any chance does anyone have a list of build options with (rough) prices for KF 700? For example, I would like to know the cost of the motorize feature for the saw unit. And for the shaper unit. And

When I worked in the wire biz we had drawing machines with 50 hp motors with nice disc brakes I expect pretty pricy My Oliver is like Dave K You might look at Centauro new machines or Zimerman see how

I love the idea of the upper brake. I called and spoke with Tannewitz and they said the hydraulic system was nothing but a headache. He also said they used a bunch of different setups over the years.

Thanks Mac, it was not very difficult. I was able to strap it to my cantilever rack to stabilize and was done in less than an hour. Sent: Saturday, October 10, 2020 8:29 PM To:

This is mine [cid:image001.jpg@...] Sent: Monday, November 2, 2020 10:15 AM To: [email protected] Subject: Re: [FOG] Felder F38 feeder repair The older F38 were sourced from

I have a Steff 2038 from around 2000, made in Italy and I have a manual. Mine has a gear shift lever. If yours has the lever I bet it's the same guts. Sent: Monday, November 2, 2020 10:15 AM To:

Shopgear is a US seller of Comatic and they seem very helpful Sent: Monday, November 2, 2020 10:08 AM To: [email protected] Subject: Re: [FOG] Felder F38 feeder repair Imran, I have an

If one axis DRO is useful on the Multi-Router Z-axis, has anyone considered adding the other two axis?? Adapting the inexpensive Chinese Milling Machine 3-axis DRO Kit to the Multi-Router may be

Freeborn show bushings in the catalog. Mark