开云体育

Hi Brett: Thanks so much for the encouragement. I appreciate your thoughts – and I don’t think you’ve missed anything. The power of brainstorming is such that even if multiple ideas end up

Lucky - Forgive if my thoughts are misguided, I might have missed some details of context: 1. If you are cutting the curve in the boards, assuming concave, save the outside waste cut to make a

Michael: Thanks for your clamp alternatives. I had not thought of the band clamps. I have heaps of those. Cheers. Imran: A backing piece is a good idea. Zebrano splinters quite nicely (unfortunately),

After hours of research, I landed on this:

Just use some sticker boards and stack on the ground, separating layers by chosen criteria, gives you room to insert a stacker with forks to lift/separate. protects lumber, safe and cheap. Cheap 1000#

I would make the caul (one side matching the shelf curve and flat on the other side), use the regular clamps. You can make the caul the same length as the shelf's, so you can use the router to trim

Hi Lucky, Thanks for the details. As for your question about trimming the edge banding, I have not used Zebrano to know how easy it is to splinter with trim router. Would a backing material help? If

Two thoughts on clamping: * ?Conventional band clamp going all the way around: https://www.bessey.de/en-gb/bessey-tool/products/clamping-tools/band-clamps Band clamps * Edge clamp:

Hi Brian: Apologies, I should have provided more detailed photos. The bookcase uprights in Zebrano are composed of a solid wood core lamination with 3mm thick shop sawn Zebrano veneers on both faces.

I had a nice cantilever rack from McMaster-Carr. https://www.mcmaster.com/products/cantilever-racks/? McMaster-Carr mcmaster.com The parts were light enough to move by hand and it held plenty of

Just an idea.... Brian Lambblamb11@...

Hey, you have a ton of lumber to build a bigger shed out of now... -- *Larry Long Neck* Just a noob trying to learn the ways of wood *Making youtube videos now! * -

Brian, I had not though about it that way, but I need to store sheet goods etc in the space too.? The door is in the center of the gable wall and would allow longer pieces in, but not 12'. I will

diagonal in a 10x10 should be slightly over 14' Brian Lambblamb11@...

Patrick, It was a hot day (mid 90's) and the loading took me 1:45 in the morning. Then I pulled it out and stacked it in my garage which took over 2 hours. Somewhat delayed by the insanity of Saturday

The racking I have is interlake martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

I have the big heavy I beam stuff but I also have 80’ 14’ tall of pallet racking the ends are 1 ‘ deep with 3’ arms two supports 1500# martin/campshure/co/llc mac campshure 7412 elmwood ave.

All my greases are Kluber martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/

140 sae heavy stuff martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/ Designing