开云体育

Well, I put "AI" in scare quotes to convey that's it's just a loose term, it's not a technology.? The point was that the iPhone is combining two distinct concepts -- binocular vision and

I'm looking for a used CF631. I'm hoping to find someone on this forum who is either selling one or has a friend that will sell one. If you know of one, please let me know! You can email me at

Sounds like a plan. Delivery is worth 500 at least. The spring will cost about $25 worst case. Start with a decent bi metal 3/4" blade and get to know the quirks of the machine. If you decide on

I put an Iturra spring on my Y20 as well and it is a worthwhile upgrade. Dave ________________________________ Sent: Friday, March 5, 2021 10:47 AM To: [email protected]

Stephen, Thought of couple more things. Looks for plastic dust shield in the shaper opening. Mine is clear plastic. This is easy to ruin if one accidentally lowers a large cutter head. Similarly,

If you’re interested, I bought and refurbished a Northfield 20 last fall and made a YouTube video series about the project. Northfield 20 Bandsaw Restoration Part

Stephen I have a KF from that “era” (2003). I do agree with the point made, if you’re working with sheet goods, and 8’ table could be a source of annoyance (I have a 9’ and am glad to have

Actually, the guy selling bought it in 2019... Regards, Mark https://www.instagram.com/kessler_woodworks/

Patrick, Thanks for clarification. I am familiar with that routine but you had written “Having to take off the outrigger for a 81" rip is beyond annoying” which is indeed a bigger deal than

Thanks Dave, does not include the power feed but he said he could deliver it as he is only about 15min away. Northfield got back to me and below is what he said. Pretty cool to get all the history,

Yes, that is correct. If your offcut rip is greater than 1/4-1/2" then it will hit the crosscut fence and prohibit you from continuing the rip. One, a longer sliding table would allow you to rip off

Patrick, “ Having to take off the outrigger for a 81" rip is beyond annoying” I don’t have outrigger on my KF but do on K975. By above, did you mean removing xcut fence from the outrigger for

If condition is good, a decent deal without the feeder and a great one with it. As a resaw it will be OK but not in the same world as a heavy ACM or Centauro 24" or a NF 27 or32". It will likely

I have a 2005 KF700 with an 80" slide, and i would encourage you to wait for an 8'+ table IF this is your sole table saw. I didnt mind the shorter sliding table as much when i had a cabinet saw, but

Stephen, I have a 2002 KF700, 3KW, 3ph with 78 or 80” slider. It is a well made machine and if no rust should clean to near new as the finish is really good. What do you mean by missing a few

A 20” 1961 northfield bandsaw came up for 2k, is that a fair price? Not sure if the power feeder is included, waiting on a reply. Appears to be in good condition, new tires, 2 hp 3p. I will be

Thanks Patrick. I did not even consider carbide on account of getting nicked. Yes I know I can shift them but it is not for me. Also if the whole thing is carbide it has to be handled with care. I

Regarding the nick, simply offset the knives by about a mm. The nick disappears and the cut is smooth. When you nick the blade the nick is in the same spot on all 4 blades. Offsetting them staggers

Thanks Fred. I was going to go “off blade” method but thought I check first. I only have 1 set, I have a nick on the old edge so that helps. I have to look again to see if I can use printing in

That’s a good question! I finally just put a piece of blue tape near the cutterhead and record the date installed and the flipped with a white china marker. I used to forget all the time. Now I know