开云体育

I posted a few weeks ago that I believed that routers slowed a lot under load. I decide how hard to push my routers based on the pitch the motor makes.? No load and the pitch is high, as the load

Hi Lucky, Delay is my middle name, you helped me with getting the air pressure set up correct for the pulse cleaning on my RL 300 Its working great but it is new. I have never got the water set up

Apologies for being a rookie - I should not have tried adding a hashtag to an existing message, it broke the thread so adding again here for continuity. Agree we could add a magnet if needed. For now

The dial regulator is sweet. Each dial I have is showing the output pressure that particular regulator is making. The tank has one from the factory, the main output regulator has one, and each

Agree we could add a magnet if needed. For now they remain 100% printed. 1. The existing version was made to fit my clamps and are friction fit....just right to separate when desired but do not fall

Taking stock in the shop, these items are available. PM if interested and we can discuss off this forum. I won't answer any questions back to the group out of respect to the other FOG members who

Bill, Yes it is 24VAC that is present on terminal 7 when in auto position. Closing external (user supplied) relay provides 24VAC to terminal 8, which should start the machine. Imran

Hahahaha! Lucky

I saw a Quincy unit in a shop with two small boxes next to the pressure relief valve. Onebox had a red LED light and was labeled “Check Valve Is Defective”. The box next to it had a red LED

By the way, someone can confirm, but the diagram says something about 24 VAC, so I guess 24V AC. Bill

Here is the RL 140 electrical diagram page for the auto start solution. Automatisk is the german version of automatic or automated, this what I was told :).

Thanks Bill. From your write up it appears that the machine starts when contacts 7 & 8 are shorted together. Anyone, with this setup should be able to see an AC or DC voltage on one of the contacts,

Hi David: “Plenty of power in Australia” is 200A at 400V of 3 phase power. I have 63A at 400V and it takes all of that to start my WB (15kW single motor plus various small motors for feed, rise

This was the relief valve that takes the pressure off the compressor itself, not the tank relief valve. Thank goodness the circuit breaker tripped before I had a full fire. Brian Lamb blamb11@...

You are absolutely right, I reread the manual and it is for the Felder automated start solution. I do not know how this OEM Felder solution works, but at some point it opens and closes this circuit

Mine too Sent: Tuesday, January 26, 2021 1:16 PM To: [email protected] Subject: Re: [FOG] Air Compressor Big and Small- David Kumm Style My Quincy compressor has 2 relief valves in case one

My Quincy compressor has 2 relief valves in case one fails. -- Jerry P *Life is what happens to you when you're making other plans.* "You can observe a lot by watching."? Yogi Berra

Thanks for the reminder on the cal air, I think I left mine on overnight- hope the shop didn’t go up in ?while I am at work... Regards, Mark https://www.instagram.com/kessler_woodworks/

I would like to get the 3d file as well please. My email is elwinkershaw@.... Much Thanks! Elwin Kershaw

I started with a California Air Tools compressor, but I tended to leave it on and the valve that releases the head pressure stuck one day and I came into the shop and the unit had almost caught fire,