开云体育

I have some very thin lines(3) that look to be vacuum (?) lines that are broken. I need to replace them. I also would like to know what their function is. Does anyone have a drawing of these lines and

Just noted the clamp that hold the engine battery secure iis gone.? Don't know how ,when, or wear. No luck finding a replacement.? Tried a Dorman Universal 00086 but its grip on the battery is

Nice, on my list! Sent from AT&T Yahoo Mail for iPad

Good afternoon Yinz, I finished, finally, my fridge replacement project. Here's a write up on what I did. -Pete 2000 EVC, ~210k miles

Thank you. The paint is PPG Break-Through Satin Base. I selected the Whirlwind tint as it is a little lighter gray than the factory gray. I wanted to brighten the interior up. There are many different

Wow is all I can say. Very nice. [email protected]> wrote:

Thanks for the post! Great info. ?Needing to do the exact thing and pls let us know how the front panel fabric restoration goes. I have the same issues.

Dennis, if you look through pics, there is a shot of the paint he used.

Wow! That looks great. What brand of paint did you use. A picture of the can label would be nice. Thanks Dennis

Just a quick follow up, I have over 145 yards of lift cord for pleated shade repairs. I only needed a few yards to do my repairs. Let me know how much you need and I can send to

Nice [email protected]> wrote:

Hi Yinz, I did a quick write up on freshening up the interior of my EVC. I hope this is useful. -Pete 2000 EVC, ~210k miles

Set of original (from 2000 Multivan) 15" aluminium wheels for sale, US $100 for the whole set (plus shipping if necessary). Can include correct (19 mm) wheel bolts. Ottawa, Canada.

My 95 usually idles around 800 rpm or so, which I think is pretty standard. If you have an elevated idle, I would guess you have a vacuum leak somewhere. Check your hoses and follow the diagram. The

Here are some photos of the old and new O2 sensors (upstream). http://www.eurovanrescue.com/2024/07/27/o2-sensor-oxygen-lambda-upstream-replacement/ Next, I'll be checking the voltage on it again. I

Thank you @Quinn. New O2 sensor (upstream) should be here in a few days.? I'll report back results.

The screen inside the frame on the sliding door of my 2001 Eurovan Weekender was detaching. I've stored the frame/screen in my basement with the plans to take care of it one day. A recent trip to

My o2 sensor bounces between .9V and .1V constantly while running. The O2 has a narrow range of oxygen concentrations it can see. If the exhaust has a lot of oxygen (engine running lean) it reads .9

Page F 01-28 in the Bentley lists group 01 - parameter 3 as the o2 senseor But it doesn't list a value. My VCDS doesn't do the mouse over range of values. Can someone else check it? Other searches

Mike; Thank you for the lead. Domokos Hadnagy [email protected]> wrote: