开云体育

I recently purchased new replacement headlights from Bus Depot, a little bit pricey but a much better brighter light than original

Why not just include them with the vehicle?

Just Google 7D1941005A and you can find some-BUT- you will wind up buying the whole assembly- haven't found lenses yet. Sam

The glass lens is NLA from usual sources- but used assemblies are on EBay and plastic replacements are available from a number of sources including Amazon. Happy hunting! Sam 02 EVC

Anyone have a recommendation for a source for a headlight lens for 2002 weekender? ?The body trim below the drivers side light also needs some help :). Driveway fender bender matt durham nh 2002

I used some "stick-on" felt- available at fabric or craft stores. Mice haven't bothered it. sam 02EVC

Looks like a critter got to the fuzzy stuff covering the cabin filter housing on my 02 weekender. I know other folks here have had this problem and I want to know what everyone is using to recover the

I would be very interested in these. kboberlee@... Thanks, Kyle

I bought the E-code headlight Kit with "deluxe harness and relays" from Bus Depot (see https://www.busdepot.com/701941017kit ) last year but never got around to installing them. We are now going to

Thank you very much, got it off and fixed locking issue

https://youtu.be/AwkV5_hALvQ

and here's a photo showing the back side - locations of all the fasteners have been circled (some are present, some came unglued and fell off):

The sliding door is held on with a number of plastic press-to-fit connectors. One side is glued to the door panel, the other side connects to holes in the metal of the door. Removal is simply putting

Is there a video on how to remove the door panel anywhere? ?Following the Groups suggestions it appears all is working, lock moves up and down, it just wont lock.

One of my EVs has a rusty hood latch cable that needs to be replaced. It caused the same problem where it wouldn't return enough to allow the hood to latch properly.? After some lubing and working

Alan, Another possibility is that the battery was installed in such a way as to engage the hood unlock cable, so that the latch is always in the unlocked position. It does indicate that an inspection

A somewhat remote possibility is that they damaged the hood release cable, preventing it from releasing completely. -- Duane 05HD Rialta 209K Miles

sometimes the mechanism in the hood needs clean and lubed so that the spring in it can move it back to where it started. It can get sticky and stay in the "open" position.

There is no obvious connection between the battery replacement and the hood latch.? If trying to engage the second latch meets with a hard stop, it's possible that the second latch somehow got

Dropping the hood will only engage the first latch hook, Pushing again does not complete the latching process. Got any suggestions? For whatever it's worth, I should note that this started happening