¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Eurovanupdate
  2. Messages
Single Messages Topics Expanded Polls

Re: Sliding door lock

Douglas Peterson
 

Thank you very much, got it off and fixed locking issue

On Monday, August 16, 2021, 02:31:20 PM MDT, Michael Diehr <md03@...> wrote:


The sliding door is held on with a number of plastic press-to-fit connectors. One side is glued to the door panel, the other side connects to holes in the metal of the door. ?Removal is simply putting something thin between the panel and the metal and prying outward. ?

On my van, the glue holding one side came loose on about 75% of the pieces, and I had to glue them back on. ?Use a really strong glue or epoxy. ?I found a hot glue gun was not strong enough. ?

You can see 4 of the connectors in this picture, all of them came un-stuck:




On Aug 16, 2021, at 12:28 PM, Douglas Peterson via <dpeterson253@...> wrote:

Is there a video on how to remove the door panel anywhere? ?Following the Groups suggestions it appears all is working, lock moves up and?down, it just wont lock.

On Wednesday, July 14, 2021, 08:59:59 PM MDT, Douglas Peterson via <dpeterson253@...> wrote:


thanks

On Tuesday, July 13, 2021, 10:33:32 AM MDT, Carl Hansen <carl_hansen@...> wrote:


Locks are electric, not vacuum. ?Pull the door card and git to it. ?
Small white plastic clips
get brittle, levers disconnect, the electric pins (4) can get corroded.

Be careful pulling the door card off.

Ch
Join [email protected] to automatically receive all group messages.