开云体育

I think there will be a PDF forthcoming for the 2000 EVC manual - look for important pages in the files section soon. Thanks all! David Richoux ev_update@...> wrote:

I've got an extra new 2001 EuroVan manual complete as it came in vehicle (in zippered case). If it or info from it would work, email me private. Cheers quizico@... ... ---In

thank you for taking the time to explain this to me! To: ev_update@... From: ev_update@... Date: Mon, 22 Jun 2015 16:33:24 -0600 Subject: Re: [ev_update] "overdrive"

lfsiegle@... [ev_update] wrote: Glad to! One that's been around for at least 20 years is the Xantrex "LinkLite" / Heart Interface "Link-10" / Cruising Equipment "E-meter". These are all

Lee, if you have something similar or better - please share.

"Overdrive" is a gear ratio that is designed to run an engine at a lower RPM at highway speed to save on fuel and make less noise. It's a ratio that is less than a 1:1 direct connection from engine to

Thought my posts were not getting thru.

well, that's odd. perhaps you never posted? for some reason you are currently 'moderated'. its nothing personal. I don't understand. Been a member for years From: ev_update@... To:

FYI - you probably could have sped up that "transmission learning" with the transmission reset procedure. This was required after the "re-wiring" of my melted wiring harness going to the transmission.

Because you are a new user, subject to automatic moderation, and I, the moderator, also have a full time job.

Thanks Norby, that's a great help. Initially I was trying to decide whether that pin was a pin or some tiny screw and I didn't want to start hammering at it without being sure. Paula

can someone tell me what people are referring to when they say they are in "overdrive"?

"she decided to go into overdrive" what does "overdrive" mean??

There is a small pin that holds the lock in place. Use a small punch to knock it out. It piece it holds in is spring loaded so watch for the spring. It is what returns the key to home position. Insert

Thank you John. I'm going to try doing it myself but if I'm unsuccessful I'll go right to the locksmith.

When I replaced my gas cap I took the old part and the new part and a key to a locksmith shop and had him swap the cylinders for me.

Thanks Patrick and Jaques for the info. I already have the door handle removed and sitting on my dinning room table. I'm having trouble removing the lock from the old handle and installing it into the

I had limp mode with my ‘97EVC twice and did a whole cleanup of the connectors to battery, ECU, ABS module and also, cleaned the big plug to the transmission.....it helped much ‘cause I don’t

what does " go into overdrive" mean

what the heck is "overdrive" ??