开云体育

My last reply seems to have disappeared. You will have to drill 10 new holes and install a reinforcing plate behind each one. - 2 holes each to mount the 2 guide rails (they are about 4 ' long and

a there mattress. Thanks

It would not be a bolt in replacement! The GL rear seat mounts to the floor with four bolts. They are in an approximately square pattern about 14", in the middle of the floor. The MV seat rolls in two

Hey All, My '93 EV's A/C compressor is cycling on and off at idle. If I hold the engine at 2000 rpm, it seems to work ok. Any suggestions? Frank 93 EV MV WK 90 Audi 100

It would probably work, however, the MV seat/bed slides on rails, so would need that and the attachment points at the (2) top corners of the seat back. (along with the support of the cuddy

Hi, I have a set of 4 alloy wheels for sale, their are stock passat 98-01 - 7 spoke with bolt pattern 5x112 They still have tires on them (Michelin Energy plus) I got that set to install on my EV but

Returned this afternoon. Lots of friendly people, lovely weather, great campsite on the water. Buses of all types from early vans to a Rialta. American flags everywhere, courtesy of the American

Can I also be removed from the list ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno

Hi, I'm trying to service the Norcold refrigerator on my 2001 EVC. I've followed the procedure described on Rich's Eurovan site (http://www.geocities.com/eurobago/norcold.html) to remove the fridge.

I have a set of 4 alloy wheels for sale, their are stock passat 98-01 7 spoke with bolt pattern 5x112 They still have tires on them (Michelin Energy plus) I got that set to install on my EV but I got

The belly pans function is to dirrect the air around the engine. Removing it could cause hot spot on the block or cylinder head and improper cooling of the radiator.

Mark, If everything else is working fine, why not replace the engine completely? At a minimum, I'd replace it with the 81K mi engine. Have you spec'd out the cost of a new engine? It's the Audi 5 cyl,

Mark, If you really like the MV (does it have the WKR package?) and want to hold on to it, you need to be prepared to spend at least $3-4K to take care of all the items mentioned by Mike (they're good

Where is your van repair being estimated ? You could try the bettle clinic in San Mateo, Bay Area. That is a great, excelent mecanic for VW. He knows very well the eurovan. You could probably call him

Anyone know if the fold down seat/bed from a MV can be installed in a standard 93 GL? I would think all the holes and attaching points are there somewhere. I have been pulling the seats and using a

I agree your block's a little long in the tooth. I like the engine with 81K much better, but there would have to be assurances that the block really does hit 175 and the top end is quiet. If you have

I was driving my '93 MV from southern California to the S.F. Bay area, where I intended to leave it with in-laws while I headed off to New Zealand for a year. It was a hot (*very* hot) day, but the

This page takes a VERY LONG time to load because there are so many pictures even with my fast DSL, but I'm very moved by it and thought some here might also be interested in seeing it. For any

Thanks, Jim. I'll keep looking locally. --Jan

Did you use the right key? When we were closing the deal to buy the EV, we tried the gas cap to make sure everything was working and we couldn't get the gas cap off either. The sales assistant tried,