Re: How to remove rear seat seatbelts?
|
Okay, I think I get it now.? I have to remove that plastic interior panel to get access to the nut so I can hold it while removing the bolt. Is it similar on the left side?
Thanks,
Serge On Tue, Dec 24, 2024 at 1:42?PM Marshall Crutcher via <marshall.crutcher= [email protected]> wrote:
Okay - sorry for not reading your full email - yes you will need to remove the lower wheel arch interior panel - that will give you access to reach the nut. ?
Apologies for skipping that step - I did t scrutinize your photo to see that you hadn’t already removed it.? ? Theirs is a nut on the backside that you must find a way to grab hold of. I think I used a smallish crescent wrench to do it.? Be VERY careful not to let the nut drop down as you might never see it again.? I think I hand unscrewed it the last few turns so I could hold it. ? Wear protective gloves. ? The metal is very rough / sharp.
Good luck!!? On Dec 24, 2024, at 3:10?PM, Serge Issakov via <serge.issakov=[email protected]> wrote:
?
I keep turning this bolt (right rear bottom) and nothing…
How do you remove this? Take the panel off?? Ugh.?
Thx, Serge?
|
