开云体育

How to remove rear seat seatbelts?

Serge Issakov All Messages By This Member #164932 I keep turning this bolt (right rear bottom) and nothing… How do you remove this? Take the panel off?? Ugh.? Thx, Serge?
Barry Black All Messages By This Member #164933 Yes,unfortunately you need to remove the fender panel. There is a nut on the back. toggle quoted message Show quoted text On Tuesday, December 24, 2024, 3:10 PM, Serge Issakov via groups.io <serge.issakov@...> wrote: I keep turning this bolt (right rear bottom) and nothing… How do you remove this? Take the panel off?? Ugh.? Thx, Serge?
Marshall Crutcher All Messages By This Member #164935 开云体育 Theirs is a nut on the backside that you must find a way to grab hold of. I think I used a smallish crescent wrench to do it. ?Be VERY careful not to let the nut drop down as you might never see it again. ?I think I hand unscrewed it the last few turns so I could hold it. ? Wear protective gloves. ? The metal is very rough / sharp. Good luck!!? toggle quoted message Show quoted text On Dec 24, 2024, at 3:10?PM, Serge Issakov via groups.io <serge.issakov@...> wrote: ? I keep turning this bolt (right rear bottom) and nothing… How do you remove this? Take the panel off?? Ugh.? Thx, Serge? <IMG_0643.jpeg>
Marshall Crutcher All Messages By This Member #164936 开云体育 Okay - sorry for not reading your full email - yes you will need to remove the lower wheel arch interior panel - that will give you access to reach the nut. ? Apologies for skipping that step - I did t scrutinize your photo to see that you hadn’t already removed it.? toggle quoted message Show quoted text On Dec 24, 2024, at 3:22?PM, Marshall Crutcher <marshall.crutcher@...> wrote: ? Theirs is a nut on the backside that you must find a way to grab hold of. I think I used a smallish crescent wrench to do it. ?Be VERY careful not to let the nut drop down as you might never see it again. ?I think I hand unscrewed it the last few turns so I could hold it. ? Wear protective gloves. ? The metal is very rough / sharp. Good luck!!? On Dec 24, 2024, at 3:10?PM, Serge Issakov via groups.io <serge.issakov@...> wrote: ? I keep turning this bolt (right rear bottom) and nothing… How do you remove this? Take the panel off?? Ugh.? Thx, Serge? <IMG_0643.jpeg>
Serge Issakov All Messages By This Member #164938 The "fender panel"? You mean the?interior plastic panel? To remove the interior panel... all the screws around the edge, I presume? Thx, Serge toggle quoted message Show quoted text On Tue, Dec 24, 2024 at 12:59?PM Barry Black via <barry.black=snet.net@groups.io> wrote: Yes,unfortunately you need to remove the fender panel. There is a nut on the back. On Tuesday, December 24, 2024, 3:10 PM, Serge Issakov via <serge.issakov=gmail.com@groups.io> wrote: I keep turning this bolt (right rear bottom) and nothing… How do you remove this? Take the panel off?? Ugh.? Thx, Serge?
Serge Issakov All Messages By This Member #164939 Okay, I think I get it now.? I have to remove that plastic interior panel to get access to the nut so I can hold it while removing the bolt. Is it similar on the left side? Thanks, Serge On Tue, Dec 24, 2024 at 1:42?PM Marshall Crutcher via <marshall.crutcher=me.com@groups.io> wrote: toggle quoted message Show quoted text Okay - sorry for not reading your full email - yes you will need to remove the lower wheel arch interior panel - that will give you access to reach the nut. ? Apologies for skipping that step - I did t scrutinize your photo to see that you hadn’t already removed it.? On Dec 24, 2024, at 3:22?PM, Marshall Crutcher <marshall.crutcher@...> wrote: ? Theirs is a nut on the backside that you must find a way to grab hold of. I think I used a smallish crescent wrench to do it.? Be VERY careful not to let the nut drop down as you might never see it again.? I think I hand unscrewed it the last few turns so I could hold it. ? Wear protective gloves. ? The metal is very rough / sharp. Good luck!!? On Dec 24, 2024, at 3:10?PM, Serge Issakov via <serge.issakov=gmail.com@groups.io> wrote: ? I keep turning this bolt (right rear bottom) and nothing… How do you remove this? Take the panel off?? Ugh.? Thx, Serge? <IMG_0643.jpeg>
Marshall Crutcher All Messages By This Member #164944 开云体育 You’ve got it down so far. ?The drivers side has a plastic cover that comes off without removing the seat belt I think. ?It’s the one that covers the heating ducts. toggle quoted message Show quoted text On Dec 24, 2024, at 5:23?PM, Serge Issakov via groups.io <serge.issakov@...> wrote: Okay, I think I get it now.? I have to remove that plastic interior panel to get access to the nut so I can hold it while removing the bolt. Is it similar on the left side? Thanks, Serge On Tue, Dec 24, 2024 at 1:42?PM Marshall Crutcher via??<marshall.crutcher=me.com@groups.io> wrote: Okay - sorry for not reading your full email - yes you will need to remove the lower wheel arch interior panel - that will give you access to reach the nut. ? Apologies for skipping that step - I did t scrutinize your photo to see that you hadn’t already removed it.? On Dec 24, 2024, at 3:22?PM, Marshall Crutcher <marshall.crutcher@...> wrote: ? Theirs is a nut on the backside that you must find a way to grab hold of. I think I used a smallish crescent wrench to do it.? Be VERY careful not to let the nut drop down as you might never see it again.? I think I hand unscrewed it the last few turns so I could hold it. ? Wear protective gloves. ? The metal is very rough / sharp. Good luck!!? On Dec 24, 2024, at 3:10?PM, Serge Issakov via??<serge.issakov=gmail.com@groups.io> wrote: ? I keep turning this bolt (right rear bottom) and nothing… How do you remove this? Take the panel off?? Ugh.? Thx, Serge? <IMG_0643.jpeg>

Previous Topic Next Topic