Have searched briefly in the archives and couldn't find an answer for this:?
Just bought a 1995 EVC and want to change the transmission fluid. I have changed the fluid several times on my 1998 Rialta (1997 Chassis) and the method for getting the fluid level correct is as described on the Baldy page, filling it mostly up and then running it until the temp reaches 105 before adding fluid to top off. I can tell the trans fluid temp there using my scanguage.?
But on the 1995 EVC - no scanguage and no inexpensive way I've found to tell what the transmission fluid temp is. So - is there a way to tell when it's at the correct temperature to complete the fill? I know my trans is a CUG, which I think is an 01P, and takes the same filter and gasket as the 1997, so I'm hoping that the pan setup is the same; i.e., the overflow tube that tells you when to stop adding fluid. If that's correct - I still need to know when it's at the right temperature to do that. Any help and advice is appreciated.?
Scott?
1995 EVC?
Scott 98RD Twin