¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Sliding door lock


Douglas Peterson
 

thanks for all the reply's. ?here in Boise it has been 90+ degrees every day, 16 days of 100+ so far this summer. ?when i lock doors with key there is a defenate click, so i will check the alignment first. ?thanks again

On Saturday, July 24, 2021, 08:49:03 PM MDT, Garry Penner via groups.io <garrypenner@...> wrote:


Another common issue that I have heard about in the wiring harness between the van body and the driver¡¯s door. Over time wires in that harness can get brittle and break.
Garry
1995, 5spd, 179,000kms.

A common issue is that the interior door panel is misaligned and binds the lock button. ?The symptom typically looks like the door tries to lock, but bounces back to unlocked. ?

However, if there's no movement at all then the lock mechanism itself may be failing or there's an electrical connection issue.

FYI there's no "vacuum" assist that I can see - it's just motors and gears.

Here's a picture of the interior of the slider locking mechanism, showing the motor and gears



On Jul 12, 2021, at 9:06 PM, Douglas Peterson via??<dpeterson253@...> wrote:

So late last year the vacuum assisted door locks stopped working on the slider door behind the passenger seat. ?I cannot get it to lock manually either. ?Any ideas on where to start? ?Thanks

Join [email protected] to automatically receive all group messages.