开云体育

I have run into the toolpost problem too. The compound is just too tall for a nice quick change post. I have a Harding L18 dovetail tool post that I thought would be just perfect. As it turned out, I

Almus, I just went through this exercise. I have a V13 and the manual calls out Mobile DTE Light for the gear box. This is a European standard so I called Chevron to get the US equivalent for the gear

I think that I overfilled my gear box; this is the "Norton" qc gearbox not the head stock. My manual specs 140wt lube for threading/feed gear box and I think 20wt for the head stock. The head stock

Almus How much oil did you put in the gearbox?, mine is at a level where the bottom two gears are about a 1/4 imersed in oil, and I dont remember the oil being 140wt either, I seem to remember that I

I've had my lathe (V10P) for about 3 months. In getting it up and going I noted that the feed gear box was empty of lubricant. I filled it with some 140wt lube. Now every time I visit my lathe I note

Welcome to the group. What kind of work are you doing with your machines ?, I am always looking out for an F1 mill. I currently have a V10P with milling attachment, Compact5 CNC, and a Unimat 3 with

I have always liked the older Emco lathes. I currently own a Compact 5, Unimat 3, and an F1 mill. I started the group emcof1mill. Anyway, I'm in the market for a Maximat 7, with inverted v-ways. If

wrote: wrote: setup but toolpost, engineering.co.uk/Engineering/dicksonquickchangetoolpost.htm

I thought that some of the emcos came with Dickson (sp??) toolpost. Which I think were made in England. At least this was what I had been told by some guy at Blue Ridge Machinery.

Almus I am also looking for the same type of quick change tool post setup I have looke

Hi I remember this topic got kicked around on the Old site... but. Is there an off-the-shelf quick change toolpost that fits the V10 and the S11 lathes? previous owner of my V10P had put on an Aloris

Great. I have some wiring diagrams for the V10; They need to be scanned and then I will put them up... I will also try to recruit some new members. -A

Almus I will upload some more files tonight, I have the Super 11 service parts book from the old Super 11 site, it is a PDF I can read it but cannot upload it as yahoo says there is no data in the

Hi Barrie. Thanks for approving me! If anybody in the wider world is reading this, the previous Super11 group disappeared. According to yahoo, this was at the behest of the moderator; this is

Welcome to this group for enthusiasts of the fine Emco V10 series of lathes, I will post as much information as I can into the files and photos sections. New members will have to be approved, this is