开云体育

Hello Roby, Leaving the AGW interface out of the discussion for a moment, once DIrewolf connects to the APRS-IS system, you need to then send it a PBEACON (Position Beacon) to let that system know

Hi all, I have compiled the latest Direwolf version for Linux and I would like to connect an APRS server and send the received data to the AGWPE interface where an APRSWeb server is connected.

Some documentation can be found here. https://github.com/jketterl/openwebrx/wiki/Configuration-guide Dire Wolf is mentioned as being used as the decoder for packet radio. It is not clear whether

1. I mean reporting to APRS-IS, I-Gate only. before uiview32, now direwolf with OpenWebRX. OpenWebRX is a web-based SDR receiver uses direwolf to decode APRS. -> http://openwebrx.de As far as I know,

You are not providing enough information for us to provide answers. You say "... I can't find out why my digipeater is not receiving packets. ..." a) Are you referring to your station is not decoding

Do you mean: 1. Report _from_ your station _to_ APRS-IS, or 2. Report _from_ APRS-IS to your Internet client? Where "your station" is UIView32 or Direwolf. I know from experience that I-gate software

Hi Andrew, but why does the station reports with uiview-32 sucessful, but with direwolf under openwebrx not? Alone because of the running time? I'm confused Original Message processed by david? Re:

Uh, are we back with the misunderstanding and false assumption that APRS-IS can be used for propagation analysis? Remember, the APRS-IS _always_ discards all but the first-received (by the APRS-IS

But the received traffic can be seen in the screenshot of the console in the previous post? Original Message processed by david? Re: Fw: Re-4: [direwolf] Reporting to aprs-is shows no digipeaters? 1.

Are you sure you have your sound card settings correct? Perhaps you have it set to an input you are not wired for? Have you also checked your cabling? Could be that you are not feeding AF to the

Hey all, New to Direwolf and APRS and for some reason I can't find out why my digipeater is not receiving packets. I am beaconing just fine and can see my position on aprs.fi (Callsign KE2ATV-10) and

I don't know what to say here other than aprs.fi is not showing any real heard traffic from your station. I would assume this is a levels issue with your SDR or an I/O issue between the SDR software

Nothing but mobile stations are reported to aprs-is. https://aprs.fi/info/a/DB0DAN Sry, but, what can I do?

The command line options could be explained better.? This has been added to the list for future enhancements. How could the user guide be organized better?? Helpful suggestions are always welcome.

You can use the decode_aprs utility, included with direwolf, to interpret the meaning. Example: echo 'KR5LM-14>APX219,WIDE2-2:=2948.47N/09533.42Wx' | decode_aprs Position, xAPRS (Unix), Xastir N 29

One problem may that you are not using plain ASCII double-quotes (Unicode character \u0022). Note that your config file text below shows Unicode characters \u201c (left-leaning quote) and \u201d

I didn’t have a spacing problem but I did have a quoting problem combined with a syntax problem. I can now tell the world at least the macOS 13+ world that to configure a iMic you have at least two

I will indeed go read that however I am NOT using OSX I am using macOS Ventura 13.2.1 a much newer OS than the old OSX versions. I’ll check the device names link you suggested and see if that helps.

Hello Keith, There was a very similar discussion about OSX and sound device names vs. capitalizaTION issues. Give this a read: /g/direwolf/topic/96051727 --David KI6ZHD

HI David and thanks for responding. The thing is I added the '-' stuff as an additional test, which we now know failed. Usually I attempt to start DW with "keithkaiser@dulcinea ~ % direwolf -c