开云体育

Hi Dan, I discovered that the GPIO pins are not the same as the Pi and have to be defined in a FEX file. I do have the GPIO working now by creating 4 GPIO ports then using GPIO3 for PTT on pin22 and

Hello! I am interested too in GPIO settings for Orange PI (One, Lite) for working with PTT, SQUELCH, but my Linux programing skill are at low level... Please share your progress about this issue.

Hello Randy, Yeah.. sorry about thast. I think there is something wrong with the new K9 Email reader for Android. Nice work about thinking to looking at the HTML source to see the plain text email!

David, I was finally able to see what you said by clicking "view source". I have spent a lot of time on this and have read the documentation...over and over and over again. I have read many other

hello Nick i orderd a OP1 in October and it came from China just at the end of November it was DOA they wanted me to send it back then they would send me another of course the return shipping was more

David, I don't know what's wrong here but all I see when I open you post is "Hello <no name given>". Could you repost what you said. Thanks. Randy

I just got myself a cheap Orange Pi SBC to experiment with and to see how it compares with my Rpi and Pi3. These devices are available for around 12USD from the far east although I paid slightly more

We have been noticing this on a Raspberry Pi, using a DIO for PTT control. It happens randomly, but at a much longer timeframe - a couple weeks to a month or so. The system is remote, so we can't

Hello <no name given> I would argue that it's 99% for sure that if you can't record the audio coming in from the USB soundcard's microphone jack, something is wrong. I would not worry about Direwolf

Okay...tried the recording and nothing on it. I had tried this before with the same results. I sent the wav file to my PC and it was silent. Other wav files play fine on my PC. Is it for sure that if

I really didn't want to write up all the things I have tried in the last two weeks. Nor did I want to force you to read all of it. I've been trying to follow what was done in the document at the link

My first attempt with telemetry. This large Direwolf project got me to this point in one day. Thanks. Running on a Raspberry Pi 3, Raspbian Jessie. Using SENDTO=RO to troubleshoot. Getting "Found

A good step #1 would be to try to record the audio from your Rpi and see if you can play the audio back though a connected pair of headphones, etc. Though more command line centric, you can follow

Are you trying to use pulseaudio or? What is the soundcard ## ... hint alsamixer in terminal you dont need to be an expert .... your not running 300mph on a track .... but you do need to learn how to

I am attempting to set up a Raspberry Pi 3 as a receive only igate. I am using a Syba USB sound card. It indicates CMedia CM119 on the package. Direwolf will not decode packets. I have tried putting

I want direwolf to hand it off to the APRS-IS network, which is what I'm struggling with as it keeps trying to send it over RF which does not exist. APRSIS-32 works fine using APRS-IS, but I don't

You need to make a decision -- do you want direwolf to communicate with the APRS-IS network, or do you want it to hand off to APRSIS-32 and let APRSIS-32 handle the connections to the APRS-IS network?

Hi Matt, AGW/KISS is set up correctly in APRSIS-32 I am actually receiving messages, if I disable Tx then it won't try and tell direwolf to send the message or ack, how do I get direwolf to treat

Configuration will be in APRSIS-32 -- you need to set up the AGW port that faces your direwolf modem to handle messages and to enable TX (although if you don't have a transmitter connected, better to

Sorry I am actually receiving messages, However direwolf is trying to send messages and ack as over Rf not the igate.