开云体育

Hello Frank, What help do you need? If you have Direwolf working on Linux, you would again follow the Direwolf User Guide to compile the code for OSX and then configure it just like you did for Linux.

The purpose of direwolf is to provide a more flexible modem via a soundcard -- TNC Pi has a built-in modem. https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-and-Direwolf-Packet-Modem for

I've got a Pi with a TNCPi (from Coastal Systems), currently running APRX. Can Direwolf "talk" to the TNCPi, or do I really need to use the soundcard modem? Thanks! Clay N7QNM

I am new to this group. I sucessfully use Direwolf on one of my Ubuntu boxes. I would like to get it to run on my Macbook Pro (running OS 10.9.5 Mavericks). I would appreciate some help. Thanks in

I recently tried my Rigblaster plug n play on Windows 10, and using the UZ7HO soundmodem it will start transmitting with the PTT but it does release it, and I have to kill my UZ7 modem app to get it

I've got UISS running with Direwolf so I can use the IGate feature of Direwolf. It all seems to be working fine except no packets appear in the UISS monitor as when using AGWPE and I wanted to see if

$ Sudo adduser (your login name) dialout Perhaps ? Dave G0WBX

As an experiment I started direwolf with sudo, and mkiss connects ok, and I can use axcall to make a call to a nearby node successfully. Is there something I need to do to open permissions on

Thanks David, here's the output from strace: kev@kh-debian:~$ sudo mkiss /tmp/kisstnc /dev/pts/3 mkiss: open: Permission denied kev@kh-debian:~$ sudo strace mkiss /tmp/kisstnc /dev/pts/3

Strange. Try installing 'strace' and send us the trailing part from the output of: sudo strace mkiss /tmp/kisstnc /dev/pts/4 --David

I have direwolf and ax25 setup on a Raspberry Pi with Raspbian and it's all working good. I just tried to install and setup Debian Hamradio Pure Blend on a desktop that comes with ax25 and Direwolf

Howdy David.. It is not gating aprs traffic because i am not using it on APRS here.. Using it as a traditional packet station on Net105 for 300 baud hf with LinBPQ. A fix was issued, which is working

Indeed...? that makes sense.? Yes, i am using the direwolf modem in a traditional packet enviroment.? It has been performing extremely well on hf.?? Tnx for the explanation and fix... 73,?

Short answer: Use of the "-qd" (quiet, don't decode as APRS) command line option will now suppress that error message. The fix is now in the "dev" branch. Just ignore the error message until you get a

Here is another one: KB7ITU audio level = 30(15/14) [NONE] _|||||| [0.3] KB7ITU>BEACON:This is an ERC station in Rexburg, Idaho. Mailbox=KB7ITU-1 Error: Information part of telemetry packet must begin

Hmmm... this VE1JOT-5 station is gating non-APRS traffic which Direwolf is complaining about: #It didn't complain about this packet for some reason but this is not an APRS formatted packet [0.2]

Hello... Since updating to the newest version (1.4d), ?i have beengetting telemetry error messages on decodes. ?Starting itlike this: ?[steve@localhost ~]$ direwolf -p -qd Here is an example...

Hi David, I can't thank you and the other folks here profusely enough. What a wealth of information for me to chew on!! Fantastic thought about the pen drive idea... I have long known linux could be

Hello Stan, DR> Without going to extra steps, NO, a classic connected session is only between the net control and a specific station. Now with that said, it can be done using special software of TNCs.

Responses embedded into your reply.... I will prefix my new comments with the word "Comment:", because I'm not sure how my reply here to you will appear at your end.