Configuration will be in APRSIS-32 -- you need to set up the AGW port that faces your direwolf modem to handle messages and to enable TX (although if you don't have a transmitter connected, better to leave TX disabled in the APRSIS-32 settings).
73 de Matt VK2RQ
toggle quoted message
Show quoted text
On 26 Jan 2017, at 7:23 am,
dale.robins@... [direwolf_packet] <
direwolf_packet@...> wrote:
?
I have direwolf set up as an IGate and using the Pseudo Kiss or AGW setup on my APRSIS-32,
Data is being sent to APRSIS-32 and can see all the stations my Rx only IGate is picking up.
I have 2 issues:
1, Any message being sent to me does not appear on APRSIS-32 nor does it send any ack packet.
2, Any message via?APRSIS-32?I send shows on my direwolf console shows direwolf trying to send it as a radio packet, however I have no Tx capable radio attached and is Rx only.
Is there a config I need to add or change for KISS/AGW to enable me to use a client attached as described.
