开云体育

Eric/David/John/Greg Shot in the dark that may be worth a look. I don't know the Windows audio system at all, but the behaviour might also be explained by some (other) process grabbing the audio

Hello Eric, You mentioned that Direwolf would work if configured to use a different sound device. Because of that, I'm now thinking this could be a CM108 Windows driver issue. All I can think of is to

Thank you again for the responses; Responding to WB2OSZ: Question 1: ?Is the Digirig connected directly to the computer or is there a USB hub in between? - The Digirig Lite is connected directly to a

"David Ranch via groups.io" <direwolf-groupsio@...> writes: I may be totally confused but have also been seeing problems about USB-C ports. It almost feels like USB-C ports are USB3

Hello Eric, Hmmm... very perplexing and I'm thinking this is a USB subsystem issue. Are there any other USB ports on your computer you can try... ideally NOT with a USB-C connector? The world of USB

Thanks again for your response. My computer specs follow: Processor: 12th Gen Intel(R) Core(TM) i3-1215U ? 1.20 GHz Installed RAM: 32.0 GB (31.7 GB usable Operating System: Windows 11 Home I'm using

The Windows audio code hasn't been touched for years so it is extremely unlikely that using version 1.8 would be any different. Rather than using audio device numbers, which can change, like this:

Hello Eric, Ok.. that's very odd as a lot of people have been successful with the digirig units. I see in your first post that you have a Digirig-Lite version but I can't imagine that would change

Hi Bob Yes the documentation is a little confusing as modem design has evolved. The current default of MODEM 300 creates 9 "B" modems roughly 30Hz apart. This handles HF stations that may be slightly

Great.? Many thanks for the solution.? I have confirmed the settings in the IC-7300 manual for Remote.Now, I have one last issue.? When I execute Direwolf, I get this message I used the settings

Hi David, Thank you for the quick reply.? I removed power from the radio and attempted the connect call again, and received the same error: PS C:\Program Files\direwolf-1.7.0-9807304_x86_64>

Good find David! Bob, this looks like your fix. From the 7300's set mode connectors menu Cheers Bob

Just a follow up to my own message but it sounds like the IC-7300 also supports direct PTT control without CAT control per this thread (for the ARDOP modem):

The officially posted Direwolf v1.7 and newest 1.8-DEV binaries for Windows do NOT include hamlib which enables CAT control. If CAT control is required for the IC7300, see the

[email protected]> wrote: would require hamlib support in Direwolf on the Windows computer. 73, Lee K5DAT

[email protected]> wrote: Yes, I also suspect that the CAT port doesn't accept PTT signaling via RTS or DTR. That should at least work with the caveat that another cable is needed and probably

Bob/Lee I think it is unlikely that the 7300 USB/serial port (PTT COM8 RTS) actually has the RTS etc pins connected in the rig internally to the PTT. It certainly isn't for my 9100 and that I think

VARA HF can also use RTS for PTT in Winlink Express. 73 Danny, K5CG HH 550-0609 SKCC 14257 To: "direwolf" <[email protected]> Sent: Tuesday, January 21, 2025 9:55:58 AM Subject: Re: [direwolf] Unable

[email protected]> wrote:

Thanks, David for your help.? I have two issues left.? The first one you commented on .? However, I do not know the correct setting for 300 baud HF operation.? Here is what I see The second issue