Re: Timeout waiting for input from audio device 0. (Windows 11, Paracon, Digirig Lite, FTM-500)
|
Hi David,
?
Thank you for the quick reply.? I removed power from the radio and attempted the connect call again, and received the same error:
?
PS C:\Program Files\direwolf-1.7.0-9807304_x86_64> .\direwolf.exe
Dire Wolf version 1.7
Includes optional support for: ?cm108-ptt
Reading config file direwolf.conf
Available audio input devices for receive (*=selected):
? ? 0: FTdx-10 Input (USB AUDIO ?CODEC
?* ?1: Digirig Lite Input (2- USB Audi ? (channel 0)
? ? 2: Microphone Array (Intel? Smart
Available audio output devices for transmit (*=selected):
? ? 0: FTdx-10 Output (USB AUDIO ?CODE
? ? 1: Speaker (Realtek(R) Audio)
?* ?2: Digirig Lite Output (2- USB Aud ? (channel 0)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate.
Using \\?\hid#vid_0d8c&pid_0012&mi_03#7&38439e45&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} GPIO 3 for channel 0 PTT control.
Ready to accept AGW client application 0 on port 8000 ...
Ready to accept KISS TCP client application 0 on port 8001 ...
Attached to AGW client application 0 ...
Ready to accept AGW client application 1 on port 8000 ...
Attempting connect to KG7ASX-1 ...
[0L] KG7ASX>KG7ASX-1:(SABME cmd, p=1)
Timeout waiting for input from audio device 0.
Terminating after audio input failure.
PS C:\Program Files\direwolf-1.7.0-9807304_x86_64>
?
I also tested VaraFM on the same frequency and did not have an error or xmit lock-up.
?
Thank you for your help.
Eric
KG7ASX
|
