开云体育

Hello J K, It's unclear if Direwolf's support can be expanded to support more sound devices but I bet the hard work is in the *test* of this change. I really doubt many people would need such a

Hello Patrick, This is very possible. Only one sound device will be available at any one time to a program but if you operate "digital HF" on your FT857 using SCU-17#1 while you operate "VHF APRS"

WB7GR-10 APRS digi / igate Computer: Rpi 3B+ / 32 bit / buster / direwolf 1.6 Generic Fleabay Soundcard Radio: Kenwood TH-79 ht Greg Rix, WB7GR gregrix@...

Setup... FTM-857D FTM-300DR 2 x SCU-17 Linux Mint 20.3 AMD Ryzen Embedded 1605B 16GB I'm trying to figure out how to configure Direwolf to act as a TNC for the 300. Yes the 300 has APRS built in but

Can Direwolf be compiled so it supports more than three clients? Sent from my iPhone 13 Pro Max

Just a thought to consider, have you tried running the USB devices with a powered USB hub? It might be possible you are running out power with your Pi power supply with the number of devices plugged

Hmmm... does these extra sound cards have unique USB serial numbers, or are they all serial number zero? I ran into an interesting problem with a couple of USB-to-RS232 adapters I had. Same cheap

Apr 23 15:52:50 KH6JUZ-10 kernel: [ ? 97.025147] usb 1-1.4: reset full-speed USB device number 5 using xhci_hcd Apr 23 20:10:50 KH6JUZ-10 kernel: [? 271.154389] retire_capture_urb: 514 callbacks

Hmmm.. ok. That's an important detail. Next up, when this happens, what does the end part of "dmesg" and the other key journald logs show? Best I can tell, you're getting USB resets. Are all

I haven't gotten as far as attaching radios to the soundcards, yet; so, not an RFI issue.

If you turn off your radios and restart Direwolf, does it still error out? If not, does it run ok for a while? I mention this as I think you're having RFI issues which are knocking out either your

works well with 2 soundcards (DINAH) but when adding a third soundcard (also DINAH), it errors out. ?I also tried using DRA-50 soundcards for all three and get the same results. ?Is this a known

Lenovo T61 Laptop 32 bit Windows 7 Professional DRA 50 interface with USB connection to computer and data cable to xcvr. Software:? VARA / Direwolf / UZ7HO Soundmodem Winlink / APRSIS32CE Kenwood

Hi Chris, Computer. 1 Raspberry PI 3 Model B armv7l 32 bit 1 Raspberry PI 4 Model B armv7l 32 bit Operating System : Raspbian 10 Buster TNC or Soundcard : Fe-pi AUDIO Z v2 ,? UDRC DrawHAT,?

Raspi 400 Raspian 109 32bit External USB Sound card (cheap) YAAC as an APRS iGate

See below. Ww2bsa@...> wrote: 32-bit or 64-bit: 32 bit

Chris: Computer (PC, MAC, Linux, RasPi):: Core I5, 8 gB memory, 32-bit or 64-bit:: 64 Operating System:: Win10 Pro TNC or Soundcard:: Soundcard If TNC, type/version/etc (PK-232, Kantronics KPC-3+,

Using windows 7 64bit with a Kenwood NX700 linked up to a Signalink jumper done to that radio. Some PC of some sort I bought from another ham by the call of N9JZY Shad "Steve" Vargo

Chris, See below: Computer: Odroid-U3 (from hardkernel.com). This is ~10 years old now so has been superseded, but is still using the same eMMC!! OS: arm 32-bit Ubuntu lite (headless) Soundcard:

I run an APRS digipeater/igate on a Pi4B (Buster) using Direwolf 1.7. The sound card is a Syba sound fob modified per the instructions on the AllStar web site. The radio is a retired General Electric