Hello Patrick,
I need Direwolf to connect directly to the SCU-17 that
is connect to the 300DR or at least directly through some virtual
interface to the USB sound interface as I have 2 radio connected
to the same machine.
This is very possible.
The idea is to be able to operate digital HF and APRS at the
same time if needed but for now I'm just focusing on VHF/UHF
Only one sound device will be available at any one time to a program
but if you operate "digital HF" on your FT857 using SCU-17#1 while
you operate "VHF APRS" on your FTM300 using SCU-17#2, that will work
fine.? Any other combination than that will be very difficult if not
impossible as neither radio supports dual sound inputs.
Heck it might even be nice to be able to act as a bridge for
APRS HF and APRS VHF or UHF, but I think that would complicate
things. For now just getting Direwolf to connect to my SCU-17 to
do packet via my 300DR is a great start.
Any help is appreciated.
Have you read the Direwolf User Guide and given it a try??
??
Please do can some back here if you have any problems.? If you're
currently stuck, please provide lots of details of what's the issue
and only then can people really help you.
--David
KI6ZHD
